Handmade process writing composition

1. The process of making a handicraft is to write a composition of about 700 words. On Saturday afternoon, I finished my homework and watched TV at home. What is said on TV is to promote environmental protection and turn waste into treasure. Suddenly, I had a brainwave. Why not do it yourself once and turn waste into treasure?

What are you doing? I rummaged through the old wardrobe on the balcony and found my old white gloves, which I can't wear now. Yes, you can use this to make a white rabbit head and put it on the pen as a decoration! Then I found white thread, scissors, cotton, crayons, red buttons, rubber bands, needles and colored paper.

First of all, you have to make a pair of rabbit ears, so you can only keep two fingers. Which two should we leave? I tried it and decided to keep my index finger and little finger. I put my thumb, middle finger and ring finger in it, which is easier said than done! Stuff your thumb. No problem. I'll open my gloves first, and then go in quietly. And the other two I can't fit in no matter how hard I try. It seems that brute force alone is not enough. I thought about it and came up with an idea: pull it in from the glove. The shape of the ear is ready, but it won't stand up and droop without hugging, which is not beautiful. I thought of a good way to put the middle finger and the ring finger into the index finger and the little finger respectively to play a supporting role. In a short time, the rabbit's ears were done.

After three fingers are inserted, three small holes are left on the surface, which affects the appearance. I put a needle on the thread and sewed three small holes. I've never had a stitch. It is easy to thread a needle, but difficult to sew. I almost stabbed my hand while sewing. After a few stitches, I gradually found the feel. The more I sewed, the more comfortable I became, and I easily sewed the gloves tightly.

The outline of the rabbit's head has been made, but there are some holes, which are too peaceful. As soon as the wind blows, it falls down. I can't help it, so I stuffed a ball of cotton in it. Prevent cotton from falling off. I tied a rubber band at the top of my gloves.

It's time to make rabbit faces. I brought a needle and thread, sewed two buttons on the rabbit's face, and made a black spot in the middle with a black marker as the rabbit's eyes. Then, I picked up a pen, traced my nose on yellow colored paper, traced my mouth on black colored paper, and stuck it on the rabbit's face with double-sided tape, thus decorating all the five senses of the white rabbit. Finally, I put it on the pen and tied a ribbon around its "neck", which not only decorated it, but also prevented it from falling. In this way, a lifelike white rabbit ornament was born in my hands. I looked at my ingenious masterpiece and was extremely happy. The white rabbit also smiled and looked at me with his eyes, as if to praise me: "You are great!" " "

In fact, there are many things that can turn waste into treasure. As long as you pay attention everywhere, you can decorate your life more colorful.

Through this handwriting, I understand a truth, you must be patient, not just brute force, but flexible, so that you will always succeed!

2. My first-grade composition small production (production process) Today, my mother and I made a small production called slippers.

It is made of green, red, pink and purple crepe paper, cardboard, pencil, rubber, double-sided tape and scissors. Here's how to make it. The first step in making slippers is to cut the green crepe paper into six pieces and weave three pieces into a braid, thus completing two green braids. These two braids are really nice! Just like it's real. Then cut the red crepe paper into three strips and braid these three strips.

Then cut two pieces of pink crepe paper, one piece of purple crepe paper, and turn two pieces of pink and one piece of purple into braids. Finally, I stepped on the cardboard and drew two footprints.

Enclose the edges of the cardboard with double-sided tape, and then cut purple crepe paper to enclose the edges. At this time, I showed an impatient expression. I dropped the cardboard and found it troublesome to make a pair of slippers. Then my mother said, "Let me help you!" I carefully picked up the cardboard, glued the insole with double-sided tape, then wrapped the green braid around the sole, and then wrapped the place where the green braid didn't wrap the red braid.

In addition, braid a braid as a shoelace, then make a bow with purple and pink and stick it on the shoelace. Finally, you finished. I looked at these beautiful slippers and let me know that I can't back down when I encounter difficulties. Sticking to the end is the truth of victory.

My little production made a little production at home today. That's a beautiful little lantern. Making this little lantern requires KT board, red paper, rope, Chinese knot and adhesive tape.

The tools needed are rulers and scissors. First, I cut the KT board my mother found me into two rectangles of the same size with scissors.

Measure the length of the long side of a rectangle with a ruler, and then divide it into four parts equally. Cut it into four rectangles of the same size with scissors.

Then make them into a long square bucket. Then make another KT board and stick it on, thus completing the main body of the lantern.

Then make a hole in the middle of the bottom, pass the top of the Chinese knot through and fix it with a pencil. Then, a hole is pierced on the corresponding two faces of the upper part of the narrow lantern, and the rope passes through and is tied inside.

Finally, I cut two laces with red paper and stuck them on the top and bottom of the lantern. I cut the window grilles outside the lantern during the Spring Festival. Such a beautiful and festive lantern is ready.

I am very happy to see the beautiful little lantern I made.

3. composition on the craft of handmade products there is a small wooden bucket the size of a fist on my desk. I know its making method like the back of my hand, and its making process is still fresh in my memory.

On that day, our grade went to the labor base for classes. That class is to make small wooden barrels. The teacher gave us a pair of disposable chopsticks, 14 short disposable chopsticks, white latex, saw, scissors, ruler, pencil, paper cup and rubber band.

After the teacher finished the method, we began to do it. First of all, I measured the position of the disposable chopsticks with a ruler, marked them, sawed them off with a saw and used them as bucket ears. Then take out the paper cup, with the root of the paper cup facing the 0 scale of the ruler, and make a mark at 6 cm. Use scissors to follow this line, cut off the excess parts and tie a rubber band on the paper cup. Then put the short disposable chopsticks in the rubber band.

But in the process of insertion, I found that the wooden chopsticks were inclined. I straightened it, and it was crooked again. I took all the chopsticks down and put the big ends of the chopsticks on them. This time, the chopsticks are straight. I continued to insert, inserted seven, and then inserted a bucket ear. Insert 7 more, insert the other ear, and the barrel will be finished.

Finally, I found the proper position of the remaining chopsticks as bucket ears, sawed them off with a saw, coated both ends with white latex and placed them horizontally between bucket ears. The keg is ready.

After returning home, I put some of my cartoon stickers on the wooden barrel, and a "cartoon wooden barrel" was made.

When making a small wooden bucket, it not only cultivated my practical ability, but also enriched my after-school life.

4. An article about handcraft, writing process and the morning of harvest day, my mother took me to the store to buy stationery. My eyes rested on several exquisite wine glasses, including white-haired grandmothers, laughing grandfathers and lively and lovely children, which added a little elegance to the store. I envy it, but it was the decoration of the store. I asked my aunt how to do it if I didn't sell it. I hurried home to be a tumbler. I found the materials I needed: a table tennis ball, a plasticine, a pair of scissors, a bottle of glue and a piece of colored paper. When I am ready, I will start to do it. I first cut the table tennis into two pieces with scissors, then took out one piece, put a piece of plasticine in the center of the table tennis, and then took out another piece of colored paper, folded it into a square and drew a diagonal line. Cut along the line, roll most of it into the shape of a pointed hat, and then put the ping-pong ball half under the pointed hat. Therefore, the tumbler is basically done. Finally, I want to turn the tumbler into a clown. I drew many flowers and patterns on the small pointed hat, and also drew hair, eyes, mouth and nose on the clown's face. Look, this lively and lovely clown has finished! I finally have my own tumbler! I put it on my desk. Every time I see him, this "clown" always tells me: don't fall down in front of difficulties and don't give in to any blows. I like this forever optimistic "tumbler".

5. composition on the craft of handmade products there is a small wooden bucket the size of a fist on my desk. I know its making method like the back of my hand, and its making process is still fresh in my memory.

On that day, our grade went to the labor base for classes. That class is to make small wooden barrels.

The teacher gave us a pair of disposable chopsticks, 14 short disposable chopsticks, white latex, saw, scissors, ruler, pencil, paper cup and rubber band. After the teacher finished the method, we began to do it.

First of all, I measured the position of the disposable chopsticks with a ruler, marked them, sawed them off with a saw and used them as bucket ears. Then take out the paper cup, with the root of the paper cup facing the 0 scale of the ruler, and make a mark at 6 cm.

Use scissors to follow this line, cut off the excess parts and tie a rubber band on the paper cup. Then put the short disposable chopsticks in the rubber band.

But in the process of insertion, I found that the wooden chopsticks were inclined. I straightened it, and it was crooked again.

I took all the chopsticks down and put the big ends of the chopsticks on them. This time, the chopsticks are straight. I continued to insert, inserted seven, and then inserted a bucket ear.

Insert 7 more, insert the other ear, and the barrel will be finished. Finally, I found the proper position of the remaining chopsticks as bucket ears, sawed them off with a saw, coated both ends with white latex and placed them horizontally between bucket ears.

The keg is ready. After returning home, I put some of my cartoon stickers on the wooden barrel, and a "cartoon wooden barrel" was made.

When making a small wooden bucket, it not only cultivated my practical ability, but also enriched my after-school life.

6. My first manual composition, according to the requirements of the book, cut off all the parts, hollowed out the ones to be hollowed out, and looked for glue. First, I folded the broken line between the blue sky and the lawn in half and flattened it, and then I began to paste it. First stick the "apple tree" on the green lawn, fold the house, coat it with glue, press it down, and then press it down, and the house will be stuck firmly. The fence is the most difficult to stick. It's stuck. The last fence can't be sticky. It depends on the serial number. One is glued to the wall and the other is glued to the blue, so that the fence can be glued. After gluing, I began to glue flowers again. I put some glue under the cut flowers, put it in the corresponding place, press it down, and the flowers will stick together and be all right. I'm really happy. Green lawn, small house with white walls and red tiles, a fruitful apple tree, beautiful fence and beautiful flowers: this is the first time I made it myself.

7. Handmade craft composition 700 words kneading plasticine is my unique skill.

Plasticine not only exercises people's hands-on ability, but also exercises people's brain ability. It is a good entertainment. I can pinch all kinds of animals and plants with plasticine.

You can pinch whatever you want, and it can be used as a handicraft when it looks good. Anyway, pinch it first.

It happens that the school has also opened a manual class, which can make all kinds of things. Among all kinds of small animals, I prefer to pinch snakes.

I decided to pinch a fierce snake with plasticine. I use several different colors of plasticine to knead together to make it dark brown, and rub it into long strips as the snake's body.

Then use black plasticine to knead into two small balls of equal size and press them on the snake head. When it is an eye, draw a horizontal line on the snake's head with a toothpick as its mouth. When someone approaches it, it seems to make a filar silk sound.

I like the snake I pinched very much. It's crooked and vivid. Of course, there are many kinds of snakes, and there are many kinds that can be pinched, among which cobra is a slightly more complicated one.

As long as we pay attention to the coordination of colors, we can pinch out all kinds of lifelike snakes. In addition, I also like to pinch birds, especially swallows, with plasticine.

Do it. I'll do it. First, find out the plasticine with the right color, and combine it with general body structures, such as head, neck, trunk, limbs and tail.

I first pinched a circle to make the swallow's head, then an ellipse to make the swallow's body, and pinched the wings and tail, and then refined the details of each part step by step, such as the ears, eyes and nose on the head; The length and curve of the trunk. Make sure that all parts are firmly bonded, set the dynamics and stick them with two small eyes.

By the way, I also took a plasticine cake (which can be made into grass, stone and other shapes to make it more realistic) as the chassis, and made it into 32313353236313431303231363533. How's it going? Is it fun to knead plasticine? Does it interest you? If so, you can also feel the fun of making it yourself. That sense of accomplishment is irreplaceable by any other activity.