How to install the villa door

Abstract: With the improvement of people's living standards, more and more people live in villas. As a high-grade residence, villas are generally equipped with better decorative building materials. As the facade of the villa, the villa gate should pay more attention to the installation of the gate, so how to install the villa gate? What are the precautions for the installation of villa doors? Let's take a look with Bian Xiao. First, how to install the villa door?

Before installation

1. Before installation, check whether the portal frame and facade are intact and whether the accessories are complete.

2. Check whether the shoelaces are straight. If there is any bending, adjust them before installation.

3. Check the diagonal of the portal frame and adjust the error to within 5 mm..

4. When checking doorways, check whether the upper and lower dimensions are consistent, whether the upper and lower dimensions are parallel to the ground, whether they are 90 degrees vertical, and whether the ground is flat.

When loading the door

65438+ For the door of Roman column, the Roman column should be installed on the door frame and then put into the account.

2, hang the facade, check whether the clearance between the facade and the gantry is parallel, whether the size is standard, whether the two facades are in a straight line when opening the door, and the clearance between the main and auxiliary doors shall not be greater than 5 mm, and check whether the opening and closing are smooth.

3. After adjustment, remove the facade and install other screws. When tightening the screws, tighten them one by one many times. The turnbuckle shall be subject to not pulling the door frame.

4. Hang the facade back and recheck the gap and opening and closing. If there is any difference, try to adjust the tightness of the expansion screw to adjust the gap and opening and closing of the door.

5. After fixing, install the fixing handle on the facade, and don't screw the handle too tightly.

6. After the installation, inject foam or cement into the gantry. If the door is adjusted, do this step again. During the operation, do not put too much pressure on the gantry to deform it.

Second, the villa door installation matters needing attention

1, the first thing we should consider is the size of the door. The gate is the first door to our house, and the size of the gate is also a very important factor. At present, the common sizes of villa gates are 1.2m*2.5m and 4m * 2.5m Of course, the courtyard gate is determined according to the overall area of the house and the size of the courtyard, and the height is not limited.

2. That depends on the materials used for the gate. The materials, thickness, strength and oxide film used for high-quality gates shall meet the relevant national standards. Generally, the thick wall should be above 1.2mm, the tensile strength should reach 157N/mm2, and the yield strength should reach 108N/mm2. If you can't meet the above standards, it is an inferior product and can't be used at all.

3, the next step is processing, high-quality villa doors, fine processing, exquisite installation, good sealing and convenient opening and closing. The inferior door is blindly using materials and specifications, and the processing is shoddy. Saw instead of milling, not installed as required. Poor sealing and uncomfortable switch. Not only does it rust in just a few years, but it is easy to hang or touch the push-pull part when encountering strong winds and external forces, which will destroy things and hurt people.

4. Finally, the price. Under normal circumstances, high-quality villa doors pay attention to quality first, so the production cost is high and the price is much higher than that of ordinary inferior doors. In addition, at present, there are more and more manufacturers of villa doors, and some of them cut corners to reduce costs and shoddy them, which has great hidden dangers and is not recommended.