Skills and methods of woodworking polishing floor

Woodworking polishing the floor is a very tedious job, which requires professional skills and experience. The following are some skills and methods for carpenters to polish floors:

1. Prepare tools and materials: grinder, sandpaper, wax block, wax water, brush, cleaning mop, etc.

2. Get ready: clean the floor, remove the old paint and wax layer, and repair the damaged parts.

3. Grinding in turn: first, grind with coarse sandpaper, then grind with medium sandpaper, and finally grind with fine sandpaper. Every time grinding, the sander should follow the direction of wood grain and brush up and down along the board to achieve a smooth effect.

4. Pay attention to grinding skills: when using the grinder, keep the machine balanced and stable when running. If you put the machine in the same place, you will leave protruding "lines" with different depths on the wooden floor.

5. Prevent dust accumulation: Before operating the grinder, be sure to clean the room and stick a dustproof film to prevent dust from entering and leaving.

6. Wax polishing: After polishing, clean the floor with a clean mop, and then evenly spread the wax water on the wooden floor with a brush until the floor absorbs all the wax water.

7. Sweep the floor and discharge pollutants: After a period of use, some tiny dirt and dust may be generated in some corners of the floor, which can be cleaned by a vacuum cleaner.

In a word, carpentry needs certain skills and methods to polish the floor. Careful construction can make the floor have a longer service life, show beautiful and natural wood grain and luster, and keep the indoor dry environment.