Why disc buckle scaffolding is becoming more and more popular?

Disc fastening scaffolding, also called disk scaffolding, is not the same type as wheel fastening scaffolding. Many people in the country to disk buckle scaffolding and wheel buckle scaffolding mixed together, obviously is wrong. Disc buckle scaffolding technology originated in Germany, is the mainstream products in Europe and America. Disc buckle scaffolding technology originated in Germany, is the mainstream products in Europe and America, the support frame is divided into uprights and crossbar, diagonal bar, there are eight holes on the disk, four small holes for the crossbar special; four large holes for the diagonal bar special. The connection of the crossbar and diagonal bar are pin-type, which can ensure that the bars are firmly connected with the uprights. The joints of cross bar and diagonal bar are especially made according to the arc of the tube, which is in full contact with the steel tube of the upright pole, and after knocking the pins tightly, it will be subjected to force at three points (two points on the top and bottom of the joints and one point of the pins on the disk), which can be firmly fixed to increase the strength of the structure and transfer the horizontal force, and the head of the cross bar and the body of the steel tube are fully welded to fix it, so that the force can be transferred without any error. The inclined rod head is a rotatable joint, and the rivets are used to fix the inclined rod head with the steel pipe body. As for the connecting method of the riser, it is mainly based on the square tube connecting rod, and the connecting rod is already fixed on the riser, so there is no need to combine with other joint components, which can save the trouble of losing and organizing the materials. Disc type connection is the international mainstream scaffolding connection, reasonable node design can all achieve each rod force transmission through the center of the node, mainly used in Europe and the United States and regions, is the upgrading of scaffolding products, mature technology, solid connection, stable structure, safe and reliable. The main materials are all made of low alloy structural steel (national standard Q345B), the strength is 1.5--2 times higher than that of carbon steel pipe (national standard Q235) of traditional scaffolding. The main components are hot-dip galvanized inside and outside anti-corrosion process, which not only improves the service life of the product, but also provides a further guarantee of safety, and at the same time, it is beautiful and pretty.