How to solve the problem of Haier washing machine not draining water

Haier washing machine does not drain water. The solution is as follows:

First, check whether it is blocked. If there is debris in the drain valve, it is impossible to drain water. At this point, unscrew the cover of the drain valve and take out the sundries.

If there is no blockage, first check whether the adjusting rod nut on the drain valve is loose, so that the tractor can't pull out the drain valve core, and then fix the nut so that it can pull out the drain valve core; If the nut is not loose or the cable is not loose, the tractor may be damaged and the drain valve spool cannot be opened. It's time to replace the tractor. If it has not been solved, it may be that the computer board is damaged and should be replaced.

Haier drum washing machine does not drain water, or it may be that the water outlet of the washing machine is lower than the drainage outlet, resulting in unclean water drainage. We can find a way to raise the washing machine a little higher and basically solve it. ?

If the outlet of the washing machine is not smooth, it may be that the clutch is stuck or the outlet is blocked. Appropriate amount of water can be added to the outlet. Then shake the drain pipe to see if there is any dirty water flowing out. If there is, it can be dredged, if not, it may be that the outlet valve is damaged. You need to find the maintenance or after-sales service department, call the person in charge or other professional and technical personnel, and solve it at home.

The reason why Haier washing machine doesn't drain water

Check the drain pipe

First of all, the washing machine doesn't drain, not necessarily because the washing machine is broken. It is recommended to check whether the drain pipe of the washing machine is placed correctly and whether the drain pipe is deformed or twisted. If it is deformed or twisted, it will affect the drainage, and then check whether the drainage pipe is unblocked and blocked by foreign objects. If these are the reasons, you can solve them yourself, not that the washing machine is broken. These conditions will make the washing machine unable to drain water.

The circuit and the drain electromagnet are attracted together.

If these possibilities are ruled out, further tests are needed. Maybe it's the attraction of the circuit and the shunt electromagnet. Turn the washing machine to single dehydration and start the washing machine. Pay attention to whether the washing machine makes a "pop" sound. If yes, the circuit and drain magnet are working normally.

Clogged drain valve of washing machine

It may be that the drain valve of the washing machine is blocked, or the tension spring of the drain valve falls off and breaks. Therefore, damaged parts need to be replaced. Check whether the drainage electromagnet is plugged in and out normally, and whether there is an open circuit or short circuit. If the failure of the controller is caused by the burning of the drainage electromagnet, the controller needs to be overhauled.

The drain pump cannot be started.

The power supply voltage is too low, the drainage pump cannot be started, or the operation is weak, resulting in non-drainage or slow drainage. Unplug the plug of the washing machine and measure the power supply voltage with a multimeter. If the voltage is lower than 187V, the drainage pump cannot work normally.