Drawing men's pants paper pattern with the same size when how to draw a thin

Western pants are pants with side seams, wearing before and after, and body type coordination pants. Shown in the figure below is the traditional style of men's pants, its style is characterized by: the front body on both sides of the diagonal pockets, before opening the door in the lapel, left and right splicing waist head, the back of the body there are two symmetrical waist province, the back of the waist, the right side of the lower right side of the waist to set up a double embedded line pocket (double lip pocket).

One, drawing men's pants paper samples required size

To hip l02cm men's specifications, for example, shown in the table below for men's pants paper drawing size.

Second, men's pants prototype drawing steps

The following figure shows the men's pants paper pattern, this paper pattern in addition to the seamless portion of the pants at the leg opening line, the other edges have been included in the lcm portion of the sewing, the waist head opening line is placed in the natural waistline, the general pants waist head opening line is placed in the natural waistline under the 4cm.

1/3 page

1.front trouser piece Starting from point 0, draw vertical and horizontal lines, the vertical line being the line of ironing in the center of the pants and the horizontal line being the line of the waist seam.

0-1 straight crotch-waist head width + lcm, after point 1 draw the horizontal line for the transom line.

1-2 Lower crotch length, after point 2 draw horizontal line for leg opening circumference line.

2-3 1/2(1-2)+5cm, after point 3 draw a horizontal line for the center crotch line.

1-4 1/4 straight crotch, draw a horizontal line through point 4 for the hip circumference line.

1-5 1/12 Hip + 1.5cm, after point 5 draw vertical line upwards to intersect hip line at point 6, and waist line at point 7.

6-8 1/4 Hip + 2cm.

5-9 1/16 Hip + 0.5cm.

5-9 1/16 Hip + 0.5cm.

7-10 lcm, connecting 6-10 with a straight line. draw the front curve through points 9, 6 and 10, with the curve 2.5cm from point 5.

10-11 1/4 waist + 2.5cm.

2 -12 1/2 leg opening width.

2 -13 1/2 leg opening width, through points 12 and 13 respectively draw vertical lines upwards to intersect the midriff line at points 14 and 15. through points 11, 8, 14 and 12 draw the front side seam arc with the curve protruding 0.5cm at the 8-11 line segment,

2/3 pages

Recess 0.5cm at line 8-

14.

Pass points 9, 15 and 13 to draw the front bottom seam arc, the curve is recessed 1cm through points 9-15 and the line.

Complete the front trouser piece pattern.

2. The back pants pattern continues to draw on the basis of the front pants pattern.

5-16 1/4(1-5), after point 16, draw a vertical line upwards to intersect with the hip line at point 17 and with the waist line at point 18. point 19 is 1/2(16-18).

18-20 2cm.

20-21 lcm, connect 19-21 with a straight line.

9-22 1/2(5-9)+0.5cm.< /p>

9-22 1/2(5-9)+0.5cm.

22-23 0.5cm, draw backstay curve through points 21, 19 and 23, curve is 4cm from point 16.

21-24 1/4 waist + 4.5cm, point 24 is on waist seam line.

Dot 25 is 1/2(21-24), and the vertical line of the back waist seam line is the center line of the back waist, take the length of the province as 12cm, and the width of the province as 2.5cm, and draw the back waist provincial line.

17-26 1/4 hip +3cm.

12-27 2cm.

13-28 2cm.

14-29 2cm.

15 Draw the back side seam arc through points 24, 26, 29, and 27, with the curve protruding 0.5 cm from 24-26 and recessing 0.75 cm from 26-29. Draw the back bottom crotch arc through points 23, 30, and 28, with the curve recessing 1 cm from 23-30. Curve at 23-30 line segment concave 1.5cm. 1cm down at point 2, with the curve to draw the back of the pants leg opening arc, complete the back of the pants piece of paper pattern.