How to lay the floor tiles? What are the steps?

Floor tiles, the materials used in decoration, need to be well guaranteed in style and quality in order to achieve better results. The effect of floor tiles is also related to the method of laying floors. How to lay the floor tiles? There are some steps you need to know. Let's take a look at how to lay the floor tiles.

How to lay the floor tiles? What are the steps?

How to lay the floor tiles-1, soak the floor tiles.

First of all, clean the floor tiles, which need to be soaked in water for no more than one hour. The purpose is to make the floor tile absorb enough water, so that the floor and the ground will be better obedient when laying, and the floor will not fall off because of the drying effect. After the floor tiles are soaked in water, the water on the surface should be wiped off before paving.

How to lay floor tiles -2. Set auxiliary line

Before paving, it is necessary to level the ground and locate the horizontal line with special tools, so that the floor tiles can be kept flat and uneven.

How to lay floor tiles -3. Tile in sequence

Floor tiles begin to be laid, usually from the balcony and the front, so that there can be a certain order. The concrete paving method is: leveling first, then smearing mud on the back of the floor tile, and then sticking the floor tile on the wall or the ground to shovel off the excess sediment. In this process, the horizontal line must be flat, and some adjustments can be made if it is uneven. Knock the high part flat and fill the low part flat. Be careful that the material is neither too thin nor too thick.

Step 5: Clean up.

Floor tiles need to be cleaned after paving, sometimes with dilute hydrochloric acid. If there is, it must be cleaned with tap water. If it is glazed tile, you need to spray a thin layer of brightener, do some maintenance and then wipe it off.