How to make a mask?

Question 1: How to make a mask? It is better to have a picture. Hello, limo dream.

Basic tools for making masks: colored pens, paper, scissors and cardboard, each 250x300mm. Rubber band 180mm long (wide), tape paper.

The first thing is to prepare the materials. Preparing materials is very important. There must be at least two colors of pens and enough ink. One side of the selected paper must be longer than the front side. Otherwise, we will be in trouble if we can't hold on. It is best to use paper with darker skin color.

Also prepare a pencil to describe the shape of the mask or erase it. The most important thing is to draw the shape first and find the feeling. Because I couldn't find the marker on impulse, I changed it to a thin purple signature pen. Then we need to find the mask pattern you need on the website or in our life. This is the moment to see your creativity.

Draw the length and width range according to the size of your face with a pencil, and then draw the outline of the exit cover with a pencil, as shown below. If it is inconvenient or you are afraid of asymmetrical outline, first fold it in half, check it, and cut out the shape with scissors. As shown in the figure below. Be careful not to cut it.

When you cut the shape, you must cut it to the longest and widest, and then compare it with your face. When it grows up, you must cut it bit by bit, and you must pay attention to the spatial imagination when cutting graphics on it. If you can't catch it, cut it open. The picture below is the result of my one-time cutting. Is it a prototype? La la la la ~

Finally, color the mask, first color half to see if it looks good, and then compare it with the other half. Drawing eyes can refer to women's usual experience of drawing eyeliner and eye shadow, which will be very good. If you are a makeup artist, you will definitely make a beautiful mask. My simple mask is ready, as shown below.

end

Matters needing attention

The choice of materials is very important. Paper should not be too hard and difficult to cut.

The pen should be thick and thin to save drawing time.

The above is Ben 9' s answer. If you are satisfied, please adopt it ~

Question 2: How to become a mask king? What's that guy? I made a mask in my homework, that is, I applied olive oil or detergent to my face first, but it must be much more uniform, but it should not flow downwards. Then cover the hole covered by the newspaper nose, don't suffocate. Just cover it layer by layer until you feel thick enough, and then take it off, and it becomes a paper mask. It can also be made of ceramics, but it is more complicated to fire.

Question 3: How to make your own mask? Simple mask making method:

Material: cardboard 250x300mm. Rubber band 180mm long (wider).

Tools: ruler, pencil, scissors, marker (selected according to drawing scheme), blade, tape paper.

Exercise:

1, according to the size of the wearer's head, cut the cardboard into face contours.

2. Measure the distance between the wearer's eyes with a ruler, make a subscript meter on the cardboard with a pencil, and make a hole (if you are not sure, make the hole smaller first, and then decide which direction to open after the wearer tries). Finally, trim the eyelets neatly (you can use a blade).

3. Cut the blades on both sides of the mask parallel to the eyes, and cut two slits that can pass through the adhesive tape paper respectively, with an interval of about10 mm. ..

4. Draw a pattern, and draw the required pattern on the mask with a colored pen (use your creativity).

5. First, fix one end of the mask and one end of the rubber band with tape paper, try to tighten it on your head, cut the required length and fix the other end. The adhesive tape must be firmly bonded. It bonds the mask and the rubber band tape together through the slit. Both ends of the rubber band can be sintered to prevent the thread from opening.

6. Just put it on.

Question 4: How to make a simple mask? Draw first and then cut.

Question 5: How to make a mask? Draw it like a rabbit, then cut it out, dig a visible place and tie a rope behind it.

Question 6: How to make a simple mask? Draw it with cardboard and cut it out! Buy the color on the white mask!

Question 7: How to make a mask? 10. You can buy a white mask online and draw pictures on it.

Question 8: How to make this paper mask? It is sold on Taobao, and it is very cheap. If you must do it yourself, there are books on it in the bookstore.

Question 9: How to make a mask? Simply look at what kind of mask it is. Generally speaking, feathers are used, but the cost is higher. If cardboard is better, use stainless steel and white glue or plastic. Why are feathers more expensive? Because you can't use chemical bleach to make the feathers of the mask, otherwise it will be bad for your skin after a long time. Feathers are naturally supple and of high quality, so the cost is higher. If the effect is better but simpler, it is stainless steel and white plastic, but if the effect is the best, white glue is the best choice, but the cost is sometimes more expensive than feathers.