How to play games with paper

How to make a paper game is as follows:

Your own DIY game is actually very simple. Moreover, the games played with children will be more enjoyable and the hands-on ability will be exercised. Cardboard can actually play many games. Next, I introduce a DIY cardboard puzzle Huarong Road game board.

Cut out three square cardboard with the same size and draw 13 squares with the same size on each cardboard. Cut out a square, and three pieces of cardboard are two specifications. The top and bottom are the same kind of cardboard with the same extended edges around them. The cardboard sandwiched in the middle is a cardboard with two wide sides and two narrow sides and the two sides are not equal. When the upper cardboard and the middle cardboard are stacked, two edges will protrude and the other two edges will be concave.

Dig a long and narrow rectangular hole at the corner of the bottom and top bottom plates to put a small panoramic thumbnail. Cut off a small corner from each small square to make the sliding smoother. The shapes of the top plate and the bottom plate are similar, and the middle splint is fixed on the bottom plate with hot melt glue gun.

Apply hot melt adhesive to the lower left corner of each small square at the bottom and paste the small square in the middle. Make sure that the small squares on each layer are misplaced and pasted. Can't stick to other small squares on this floor. After pasting this layer, apply hot melt adhesive on the panel and fix the upper panel. Apply hot melt adhesive to the upper right corner of the middle cube and fix the top cube. The staggered two-plus-one sandwich mode allows each three-layer cube to form a slot with each other, which can move freely and will not fall out.

After pasting everything, print a favorite photo. Divide the photo 12 into equal parts and stick it on the finished floor one by one. Print a thumbnail and fix it in the small window above for comparison. Similarly, paste the puzzle on the other side. Just write some logo.