How to install the entrance bottom plate of tank furnace

The installation of the bottom plate of the air inlet of the pot helmet furnace needs to be operated according to the specific furnace type and the installation instructions provided by the manufacturer. Different types of pot helmet furnaces have different design and installation methods. The following are the installation steps.

1. Preparation: Before installation, ensure that the air inlet bottom plate suitable for the can furnace has been purchased, and check whether the bottom plate is in good condition.

2. Turn off the stove: make sure that the cooker has been turned off, and disconnect the gas source or power supply.

3. Cleaning the furnace: Before installing the air inlet floor, clean the bottom of the furnace to ensure that there are no sundries and dirt.

4. Install the air inlet bottom plate: According to the design of the air inlet bottom plate, correctly place the bottom plate at the bottom of the can furnace to ensure that the contact surface between the bottom plate and the furnace is closely attached.

5. Fixing the bottom plate: according to the instructions provided by the manufacturer, install the bottom plate of the air inlet at the bottom of the boiler helmet furnace with screws or other fixtures to ensure that the bottom plate is firmly fixed.

6. Connecting pipes: Connect the air inlet bottom plate with the gas or other supply pipes of the furnace as required.

7. Inspection and testing: After the installation is completed, carefully check the installation of the air inlet bottom plate and test it to ensure the normal operation of the furnace.