Wool hat weaving

1. Prepare needles and wool. Now start sewing, tie the wool in a slipknot, then put the needle in, wrap your right hand and sew 30 stitches on the needle.

2. Start knitting the brim. Knit the brim with two needles, and knit the brim to the required length.

3. Start knitting the hat body. Knitting the cap body without adding or reducing the straightening needle. After knitting the hat to the required length, start knitting the top of the hat. The knitting method is: after knitting two straight needles. Two stitches and one stitch. Finish knitting this circle. Then repeat the knitting twice in the same way.

4. After the needle is closed at the top of the hat, there is still 10 needle on the rod needle, then thread the coil on the reverse side and tighten it; Then turn it over and sew a beautiful bow on the hat.

How to knit a hat

The knitting method of the hat is monochrome. The first step is to start knitting hats with wool and determine how many stitches to knit according to the size. The edge here starts with 8 stitches, then weaves 15 thread to complete the first horizontal bar. Step 2: Pick 8 stitches from the next stitch, and thread the second knitting needle to complete the knitting of the second horizontal bar.

We have prepared a stick needle and cotton thread. First, we will make a knitting demonstration from 30 stitches, and then we will circle the upper and lower stitches. Then it can be woven to the length of the edge of the hat. After the brim of the hat is knitted, the hat body is knitted again. Weave the hat body to the required length, and then prepare to start knitting the hat top. To knit the hat top, you need to close the needle, knit two stitches, and then close two stitches to complete the loop. Knit it twice like this. There are still 10 stitches on the patch.

Then prepare the wool head, put it into the loop and tighten the reverse side. Finally, turn it over and tidy it up, so that the hat is woven.

What is this hat made of?

1, hat knitting is divided into four parts: starting, hat edge knitting, hat body knitting and hat top knitting. Let's start with the first part, starting with 30 stitches, and make a knitting demonstration. Starting method: first tie a slipknot on the sticking needle, then wrap it with your right hand and put it on the sticking needle. 30 stitches, and it's done in one stitch.

2. The second part weaves the brim. After starting the needle, the hat edge is knitted, one needle is knitted in a circle, and the other needle is sewn, commonly known as the upper and lower needle. Repeat knitting to the required brim length.

3. Part III Braided Hat Body. After the brim is knitted, the hat body is knitted again, and the hat body is knitted by coil, so it is not necessary to increase or decrease the required length of repeated knitting to the hat.

Hat weaving

The fourth part weaves the hat top. When the hat is knitted to the required length, the top of the hat can be knitted. The knitting method of the hat top is as follows: first knit two straight needles, then knit two straight needles, then knit two straight needles and then knit one needle, and so on; Then continue to knit two more times in the same way.

At this point, there are still about 10 turns left on the sticking needle. Next, we adopt a beautiful and simple top sealing technology. We can thread the coil with wool head and then tighten it on the reverse side. Then turn it over and tidy it up, so that the hat is woven.

Weaving method of wool hat

Weaving method of wool hat

When the cold winter comes, every ingenious and beautiful MM may weave a fashionable and warm hat for herself or her relatives. Here's how to knit a wool hat. For more relevant information, please pay attention to the relevant columns!

Knitting method of wool hat-knitting ear protection;

1, starting from 7 stitches, the first action is 1 reverse stitch, 2 straight stitches, 1 reverse stitch, 2 straight stitches, 1 reverse stitch.

2. When weaving to the fourth row, add 1 needle on both sides. In the next 6 rows and 8 rows, the number of stitches is the same until the number of stitches is 13, and no more stitches are added upward.

3. In line 5, screw two groups of straight needles into the bottom of the diamond.

4. In rows 7 and 9, the straight stitches on both sides of the diamond cross the outer reverse stitches respectively.

5. 1 1 and 12 keep the original pattern knitting.

6. In lines 13 and 15, the straight needles on both sides of the diamond cross the inner reverse needle respectively.

Weaving method of wool hat II. Knitted hat body:

1, take two needles 2 1 and connect them with two ear protectors that have been woven.

2. 1 line continues the pattern of ear protectors, and the whole hat has four big patterns. From the ear protection, it is: 4 stitches backward, 2 stitches forward, 1 stitch backward, 2 stitches forward, 4 stitches backward, 4 stitches forward. Four times in a row

In the second row, all four patterns are twisted together with diamond flowers. Repeat the knitting method of ear protectors, twisting once every 4 rows.

4. Continue knitting. At the end of the second diamond, start to reduce the needle for the first time and subtract the' reverse needle' in the middle of the diamond.

5. Take the remaining four stitches of the diamond as the edge, and then subtract 1 stitch from both sides every two rows.

6. After subtracting all the reverse stitches, there are 32 stitches left. After that, reduce 1 stitch every 2 stitches, knit 2 or 3 rows upwards, and tighten the remaining stitches.

Knitting method of wool hat 3 decorative hat:

1, preparation materials: hook 10 pea with crochet, 2 strands of wool about the thickness of index finger for knitting, hook 2 60 cm long ropes to make bows, and make pompoms about 9 cm in diameter.

2. Lock the hook around the edge of the hat with the anti-short needle, not too tight. Thread the wool through the needle in the middle of the back of the ear protector and weave it into three sections. Then turn to the front of the ear protector, put the string through the middle of the braid and tie it into a bow, then tie the pea in the middle of the diamond, and finally tie the fluffy ball on the top of the hat.

What are the knitting methods of hats?

Tools/raw materials

Wool and needles

1, after picking up the needle, we began to knit the edge of the hat. We knitted a stitch for the top and a stitch for the bottom. Weave to the required length.

After picking up the needle, we began to knit the edge of the hat. We knitted a stitch for the top and a stitch for the bottom. Weave to the required length.

3, and then began to change the needle method, 6 needles under the needle, 6 needles on the needle, 6 needles under the needle, 6 needles on the needle, a group of ***8, distributed 48 needles. Then start knitting 6 stitches, up and down 6 stitches, and weave 10- 12 rows.

3, and then start twisting the needle, twisting the needle method: start twisting the needle when the needle comes down, pick the first 3 needles on the toothpick, weave the back 3 needles first, and then weave the selected 3 needles, which is also the back one.

4. After twisting the needle, continue 6 stitches, 6 stitches, and weave forward. When the knitting needle reaches line 10- 12, you can knit again. Weave to the required length.

5, then start to reduce the needle, the method of reducing the needle: knit a needle to drop the needle, then repeat two needles and one needle to complete the first lap, and then knit a circle to drop the needle.

6. According to this needle reduction method, the needle is reduced for three times continuously, and there are still 12 turns on the stick needle. Then leave a 20 cm thread, thread the wool into the loop, and then tie it tightly on the reverse side.

7. Then turn it over and tidy it up, so that the knitted wool hat is knitted.

Extended data

Maintenance method of hat:

1, underwear should not be soaked in hot water to avoid yellow sweat spots.

2, pay attention to ventilation, to avoid the fabric be affected with damp, so as to avoid the fabric mildew.

3, wash and dry, dark and light colors are separated, it is best not to put them together, put mothballs to avoid insects.

4, avoid long exposure, so as not to reduce the fastness and cause fading and yellowing, especially the sun exposure.

Wool hat knitting method

Wool hat knitting method

Knitting hats is a process in which practice makes perfect. Let me introduce the knitting method of wool hat to you, hoping to help you!

Step 1: knit the ear protection part of the hat

Start with 12 needle, 2 times, 2 times, 4 times, 2 times, 2 times. This side is the front. After weaving 6 to 8 rows back and forth, twist the twist on the front with 4 stitches.

Step 2: Add needles to the ear protection part.

After twisting the twist, weave the reverse side, centering on the 4 stitches of the twist, and add 1 stitch on both sides. Knit the front, add 2 stitches, and knit the next twist stitch, so there are no pinholes. In the same way, add 9 stitches, *** 18 stitches. Stop knitting the front face and sew 30 stitches on the sticking needle.

Step 3: The ear protection part on the other side.

Repeat steps 1 and 2 to knit the ear protector on the other side.

Step 4: Connect two ear protectors.

Add 20 stitches after 30 stitches in the first ear protector, 10 stitch in the second ear protector and 1 stitch in the first ear protector, and knit in loops. , a total of 90 stitches.

Step 5: weave a single thread at the edge of the hat.

1 top 1 bottom knitting 8 rows, 6 caps and screws. Divide 90 stitches into 9 parts, each part 10 stitches, 4 stitches on the top and 6 stitches on the bottom, and weave 5 rows. Line 6, twist the twist at the lower needle of 6 stitches. Weave 7 more rows and twist them at the bottom of 6 stitches in the 8 th row. Weave five more threads. Seven stitches are subtracted from the top of the hat, and nine stitches are subtracted from 90 stitches. 9 copies of the twist, each with 10 stitches, taking 1 copy as an example. 1 line, 4 lines changed to 4 times. Line 2, 8 pens, 9 10 stitches combined into 1 pen. The third line, nine strokes.

Line 4, 7 strokes, 8 stitches and 9 stitches, making it 1 stroke. Line 5, eight strokes. 1. The other 8 copies did the same, and finally there were 9 stitches left. Thread and tighten.

Step 6: Make small pompoms to decorate the top of the hat.

Step 7: Tie the thread to the ear protector, braid it and make a beautiful ear protector.