What about a wall vent toilet? Do you know how to do it?

①, low noise: because the wall row toilet tank is used in the wall installation, there is a wall barrier, flushing, the sound is naturally much smaller. ②, easy to shift the toilet: wall row toilet shift than ordinary floor row toilet shift is much more convenient, and does not affect the layout of the bathroom space. ③, covers an area of small: wall-mounted wall row toilet using wall installation, covers an area of small, more open space. ④, easy to clean: wall-mounted wall-row toilet without health dead ends easy to clean, very much in line with your clean personality. Wall-mounted toilet application considerations Many consumers are concerned about the wall-mounted wall-row toilet will not be sitting down, look at the wall-mounted wall-row toilet installation, there is such a doubt is very normal. In fact, the load-bearing is not wall-mounted wall-row toilet, not the wall, not the tank, but the bracket in the wall. Repeated experiments by the professional and technical center proved that it can withstand 400 kg of gravity, so there is no need to worry about the toilet will be sitting down the danger of collapse. Please note the following points wall-mounted wall discharge toilet precautions: ①, the wall row pit distance: if the installation of wall-mounted toilet should first measure the height of the center of the sewage outlet from the ground, which is the pit distance of the wall row. Tips: measurement of the thickness of the tiles should be taken into account, the measured distance minus the thickness of the tiles about 1-2 centimeters to be appropriate. ②, sewage way: wall-mounted wall outlet toilet drain in the wall, also known as the side row. Modern new neighborhoods have some of this drainage, this can be installed in the tank and wall-mounted toilet. ③, water parts selection: because wall-mounted wall-discharge toilet tank hidden in the wall. Water tank materials, technology and internal water parts is more important. Whether it is hdpe (high-density polyethylene, can be simply understood as a high-level resin), whether it is a one-time blow molding, this directly determines the service life of the water tank. The process is not in place of the tank will be very easy to leak, and which the water inlet valve and drain valve also need to be high-quality verification, otherwise the hidden water tank becomes hidden trouble. Choosing a hidden tank must consider whether the manufacturer is professional, verified by the public.