Disassembly method of old bidirectional washing machine

There are many things to pay attention to when dismantling the old two-way washing machine. Here are some basic steps:

1. power failure: unplug the power plug during disassembly to avoid electric shock.

2. Panel removal: To remove the panel of the bidirectional washing machine, it is usually necessary to unscrew the screws on the lower panel, remove the top control panel or press the pin wire column to loosen them one by one.

3. Gasket Panasonic: To loosen the gasket, it is usually necessary to remove multiple screws. Be sure to note and record the position and size of each screw for subsequent assembly.

4. Motor removal: Remove the motor from the external base, so that the motor can be easily removed. Pay attention to avoid motor damage during disassembly, and trace all motor wires to ensure that they are connected back to the correct position during assembly.

5. Disassembly of the pump: Take the pump out of the base behind the machine. At this time, be careful not to damage the wire of the pump and clean the surface of the pump.

In short, in the process of dismantling the old two-way washing machine, we must be careful and make relevant records. A careless damage may make the whole washing machine ineffective, and may even damage your floor, water source and other facilities. Therefore, it is recommended that experienced people disassemble or go to a professional maintenance service center for maintenance.