Crystal Nail how to do

How to do crystal nails

How to do crystal nails, love of beauty is reflected in every little detail, many girls who love the beauty of even the nails would like to do beautiful and elegant, the fingers are not long enough to make up for the regret of the nails, to meet the demand for girls to love the beauty of the following crystal nails how to do.

Crystal Nail how to do 1

Tools / raw materials

Sable brushes, solvents, bonding agent, crystal powder, finger film, gauze, soaking cotton, polishing cotton, protective nail polish, nutrient oil, glass, nail clippers, dead skin push

Methods / Steps

Cleaning Remove dirt from hands, nails, and inside the leading edge of the nail to prevent cross-contamination,? Remove dead skin around the nails with a dead skin pusher (can be combined with a softener).

Polishing the surface of the nail, and in the surface of the nail to polish a lot of small scars, let it and the crystal powder adhesive firm, lasting, but must pay attention to is, after polishing with a brush to remove all the nail debris, can not make any particles left on the surface of the nails, polishing out of the small scars like small grooves, in order to on a certain amount of drying agent.

On the desiccant. Desiccant gushing into the groove of the nail surface can enhance the adhesion, otherwise the crystal powder can not be firmly affixed to the nail, a day or two will be loose warping, which is an important step in the process of making crystal nail. The desiccant is not only used to tighten the nails, but also can remove the nail surface oil stains, kill all kinds of bacteria on the surface of the nails, but the desiccant is a kind of irritating strong acid, will cause skin redness, bubbles, burning pain and itching, should not be in contact with the skin, if contact, immediately wash with water.

On the finger drag, on the crystal powder. Generally available 3-4 drops of powder made.

The first drop of powder: available transparent color nail powder, natural color nail powder, white nail powder, colored nail powder. Dip the sable brush with a good solvent into the desired color of nail powder (the more solvent is retained on the sable brush, the larger the nail powder dipped into the ball, and vice versa, the smaller), put it on the front edge of the nails to smear, the ball should be larger, the action is mainly to shoot, from one side to the other to shoot, plasticity, clear the edges.

The second drop of powder: available transparent color nail powder, natural color nail powder, color nail powder, hold the pen as holding a pencil, apply in the upper part of the nail, the ball is a little smaller, the action is the same as applying nail polish, to the direction of the first drop of powder to pull smear.

The third drop of powder: the same as the second drop of powder (but the thickness of the nail powder in the nail can not exceed the skin of the finger), flowing out of the nail of the finger skin 0.8 millimeters, both sides of the nail groove the same 0.8 millimeters, so as not to contact with the skin, resulting in skin allergies, pain.

The fourth drop of powder: coated in the middle of the nail. It can fill the uneven nail surface of the nail and make it smooth. Highlight the height of the nail, such as the first three drops of powder has been good, you can not use the fourth drop of powder.

Finally, as the crystal powder solidifies and takes shape, use both thumb knuckles or fingertips to squeeze both sides of the nail at the same time, with a little force, so as to give it a natural shape, forming a "C" shape, or you can use a plasticizer stick to shape it.

Remove the finger drag, after the crystal powder is dry, remove the finger drag

Further rest shape. When the first drop of powder is applied, if it is well shaped, it will be easy to rest, otherwise it will be a pain in the ass.

Sanding. First, polish the sides of the furrows so that their width is symmetrical and does not exceed the width of the original edge of the nail, then polish the surface of the nail with a strip of fine-grained 'gauze'.

Polish the surface of the nail with foam.

Polish the surface with a buffing surface.

Apply nutritive oil.

Apply protective polish.

Cautions

Don't do manicure on inflamed, red and swollen cuticles and diseased nails.

The amount of crystal powder should be appropriate. The solvent should not be too much so as not to get inside the crystal powder box, nor should it be too little, otherwise the crystal powder will dissolve impermeably. To master the angle and movement of holding the pen.

The front and back edges of the nails should be thin and not stick to the skin.

Sanding and polishing the surface of the nails should be careful not to use too much force or sanding is not in place.

What is the practice of French crystal nails

First, tools and necessities

1, disinfectant water, 2, nail polish, 3, softeners, 4, nutrient oil, 5, glossy oil, 6, nail adhesive

7, three-color polishing strips, 8, wash and polish 9. 100# file 10. orange wood stick 11. nail clippers

12. push skin sanding stick 13. nail clippers 14. U-shaped clippers 15. nail brush 16. nail plate 17. alcohol

repairing the shape of the carving and grinding

main skills:

1 , House to carve grinding

2, clean dust

3, on the drying agent

4, on the paper mop, the front edge of the two sides should be articulated to fit the nail extension

5, the front edge of the Department of the first pen of powder, flat beat, spread to the appropriate length and thickness

6, the second pen, and the first natural articulation, the powder less than the first pen of powder,

<

7, the third pen less powder, patting and sweeping in front of the crystal to connect the natural arc, do not let the crystal powder into the nail grooves and under the epidermis, with the tip of the pen and the epidermis 0.5 mm distance

8, in the surface of the status of the uneven (usually in the middle of the 4th pen to make up for the powder) powder to be more wet with the brush with the beat to the surface to adjust the uniformity of the nail, to be dry when the nail body eighty, and can be extruded C arc (milling, polishing).

French crystal nail is a kind of crystal nail, the front of the nail has a white or light pink extension. It is suitable for daily life, not very eye-catching in the office, but also more noble, so the price is more expensive, just like the LV bag. Of course, there is no lack of counterfeit back, crystal powder and white shellac, if only painted on the nails, of course, there is no harm, go to the store can buy of course, it will be uncomfortable, the fingers feel up, twisting towels, wearing clothes, typing is not convenient, and special injuries to the nails, doing housework, it is very easy to fall, for the damage to the nail, generally do not stay long nails, easy to break.

Do not rub nail polish hard nail polish and other things, it is very bad for the nail. Let it grow naturally, less contact with chemicals, such as washing and shampooing with gloves will be better. The nail growth depends on the individual's physical condition, two or three months almost. It's a good idea to not polish your nails.

French crystal nail because it looks like crystal as bright and transparent got the name, very elegant, suitable for office women to dress up their nails, loved by women in Europe and the United States, the last few years, has just begun to enter the Chinese market, is very popular, their own DIY French crystal nails is also a good choice, affordable.

Crystal Nail how to do 3

Why the crystal nail will buckle beauty

Crystal Nail warping reasons, there are roughly the following kinds of situations:

1, the natural nail is not dealt with. Generally speaking, the nail surface grease is not removed, the back edge of the dead skin is not removed cleanly, grinding is not in place, as well as dust removal is not clean, etc. will cause warping.

2, lay powder problem. Generally in the pavement of the rear edge of the nail powder to be thin, and can not let the nail powder into the nail groove and epidermis, and the skin to leave a distance of 0.5MM.

3, on the drying agent (twice) each time to be less on the first dry after the second

4, on the paper mop, the front edge of the two sides of the articulation, to fit the nail extension 5. the front edge of the Department of the first pen of powder, flat pat, spread to the appropriate length and thickness 6. the second pen, and the first pen of the natural articulation of the amount of powder is less than the first pen of powder, 7, the third pen of the amount of powder is even smaller, patting and sweeping in the front of the crystal. Receive a natural arc, do not let the crystal powder into the nail groove and epidermis, with the tip of the pen to draw a distance of 0.5 mm from the epidermis 8. On the surface of the uneven position (usually the middle of the 4th pen on the complementary powder) nail powder to be more wet, with the beat brush will be adjusted to the surface uniformity, to be eighty percent of the body of the nail dry, and can be extruded C arc (grinding, polishing)

5, I have a P agent becomes yellow how to do it, can I still use it?

P agent is a strong oxidizer, its function: disinfection, drying, bonding. Yellowing is due to placing it for too long or oxidizing and intertwining in the process of contacting with the air, so that the continued use of P agent will directly affect the quality of the crystal nail production, and the direct manifestation is premature warping.

6, how to fingerboard can be accurate?

Finger plate is in the process of crystal nail production is a very critical step, first of all, to the right, to the center line of the finger plate and the joints of the nails to the right, the finger bracket will never be crooked, in addition, the finger plate should be tightly coupled with the leading edge of the nails, there is no gap to do, and then it is necessary to the finger core and the finger plate coincidence, not just coincidence with the finger plate, with a small scissors cut the finger plate, until coincidence, follow the above 3 points, the finger plate will be able to be used in the production of crystal nails, and then the nail plate will be used in the production of crystal nails. Follow these 3 points, on the fingerboard is no problem.

7, crystal powder why warping?

First: the grease is not removed cleanly, the dead skin is not clean enough, the carving and grinding is not in place, dust removal is not clean, will cause warping.

Second: the powder, the back edge of the nail powder to thin.

Third: too much sanding will also buckle.

Fourth: crystal, the quality of the desiccant problem or too much desiccant. (The quality problem is that the ingredients are not stable)