Do the stitches and hems of cross stitch mean the same thing?

Embroidery hemming is the last step of cross-stitch sewing, that is, sewing is started anywhere on the embroidered cloth corresponding to the drawing (the embroidery thread must be buried and fixed before sewing), and the horizontal line, vertical line and diagonal line are pulled out by pulling wires. But in the process of drawing, we must pay attention to the length of the thread head and try to control it within 3 squares. A very long straight line can be divided into several sections as long as the distance does not exceed 3 squares. Finally, the remaining embroidery thread should pass under the embroidery thread on the back and be fixed.

Where is the starting point and falling point of hem on the drawing, you should start or drop the needle from there, and don't enlarge the needle eye while tightening the embroidery thread.

General 14CT small embroidery cloth uses 1 strand wrapping, 1 1CT and 9CT embroidery 2 strands.

The following is a schematic diagram of wrapping. Odd numbers are tied up, even numbers are tied up, and operations are performed in order to form a continuous line segment. This method is also called edge sewing.