Traditional Culture Encyclopedia - Traditional festivals - Ten steps to improve the construction technology of wood grain brick paving

Ten steps to improve the construction technology of wood grain brick paving

Wood grain brick not only has the warmth and comfort of wooden board, but also has the characteristics of easy care of ceramic tile, which is deeply loved by owners who like the texture of wooden floor but feel troublesome in maintenance. Let's talk about the construction technology of this wood grain brick first:

Construction technology of wood grain brick;

Construction technology of wood grain brick: 1. Determine the plan.

The common paving methods of wood grain bricks include herringbone, I-shaped, oblique diamond and other paving methods besides the well-shaped and horizontal and vertical paving methods like traditional ceramic walls and tiles. There are many ways to pave the road. Each has his own merits. So be sure to determine the plan with the designer first.

Construction technology of wood grain brick: 2. levelling

The so-called leveling, that is, before paving wood grain bricks, should deal with the paved building floor or wall. Such as floors, interior walls, exterior walls, etc. Remove surface attachments and mix in semi-wet cement sand for paving.

Construction technology of wood grain brick: 3. Elastic curve

Elastic line refers to a long and thin line, coated with white ink, to determine the central axis of the brick, and then laid according to the line.

Construction technology of wood grain brick: 4. Brick selection

It depends on the variety of bricks planned to be laid, and it should be arranged and put away. For example, wood grain bricks on the floor, wood grain bricks on the wall and wood grain bricks on the footstone should be distinguished to avoid confusion when paving.

Construction technology of wood grain brick: 5. Dip bricks.

Wood grain bricks should be soaked in water like polished bricks and antique bricks, using tap water or clean water, not muddy water or dirty water, and not oily sewage; The soaking time does not need to be too long, which means that soaking is enough. Tiles must be soaked thoroughly before they can be laid. )

Construction technology of wood grain brick: 6. Mud mixing

Cement and sand should be mixed according to the ratio of 1: 2, and 325 cement should be used. The cement with too high label will form internal tension on the wood grain brick, which will seriously crack the wood grain brick.

Construction technology of wood grain brick: 7. grout

Take out the soaked wood-grain brick, dry the water stains of the wood-grain brick, evenly coat cement slurry on the back of the wood-grain brick with a thickness of 2-3cm, then spread the wood-grain brick on the cement sand surface of the ground, and gently tap the surface of the wood-grain brick with a wooden hammer until it is flat and orderly.

Construction technology of wood grain brick: 8. Kuaishimian road

When paving, pay attention to the grain order of wood grain bricks and the arrow marked at the bottom of wood grain bricks. When using a wooden hammer, empty knocking should be avoided, and the force should be balanced to avoid too much or too little force. It is best to use a plastic cross for paving bricks, which can better locate wood grain bricks. Knock the overflowing cement slurry in the seam of wood grain brick with a wooden hammer, and smooth it with a sponge or rag. The gap of high-grade wood grain brick is generally less than 1 mm, and no special joint filling is needed.

Construction technology of wood grain brick: 9. dressing

When the wood grain brick is paved and the cement is not completely dry, it can be observed with naked eyes or measured with a level meter, and the wood grain brick can be trimmed according to the standard. Check the flatness of paving bricks and the flatness of brick joints. If problems are found, repair them immediately, and pry open the wood grain bricks carefully and repave them.

Construction technology of wood grain brick: joint filling

If you want to fill the joint, use the iron hook to fill the joint after the cement is dry, and then use the joint filler with matching color to fill the joint.

The construction technology of wood grain brick is basically the same as that of ordinary ceramic tile, and it can be better laid in ten steps. The construction technology of wood grain brick is introduced here, hoping to help everyone.