How to dismantle the old-fashioned long strip ceiling

1, look at the installation to repair the corners and pvc plate whether to play the glass glue, if played, first with a utility knife to cut the PVC pipe.

2, put a word screwdriver or utility knife inserted in the last piece and the penultimate seam, gently up and down, wait a while that piece of pvc board will be loose, and then that piece of board to repair the corner of the left and right a little hard to push or shake, there will be a side down.

3, and then use both hands to grab the side down, gently press down a pressure, pull hard out. The others can be removed in turn. Remove the inside of the board, you need a Phillips screwdriver, because each piece of pvc board will be self-tapping screws on the mother of the seam, first under the self-tapping screws, and then slowly dismantle, do not break, and do not rush.

4, open the pipe hole, first remove the plate in the direction of the put, and then in the need to open the pipe hole in the place to make a mark, and then buy the pipe vertically placed in the mark, with a paintbrush along the pipe to draw a circle, and then use the hole opener to open the hole. After that, put it on according to the original path, and glass glue around it, and the disassembly is completed.