How to clean the pipeline?

The steps of cleaning the pipeline are as follows:

1. First of all, it is necessary to prepare a necessary bar before cleaning the pipeline. There are various styles on the market now, but the cotton sliver has the highest cost performance. Using its adsorption function to clean condensed water has a good effect. However, it is suggested that before use, both ends should be rubbed with your fingers several times to avoid tiny fluff falling off.

The bar is ready, and the next step is to basically clean the pipeline. Before cleaning, spread paper towels to avoid soiling the desktop, which is convenient for follow-up. Cleaning the pipeline is to clean the flue from the middle connection part with a stick after the pipeline is cooled, and then replace it several times, basically using about 2 pieces. If the pipeline has no filter element, it needs to be cleaned with paper towels.

3. The next step is deep cleaning. It is enough to lay a good foundation for novice soldiers. If you are a fighter and change tobacco frequently, you need to carry out deep cleaning and use professional cleaners. Remove the stains and residual odor in the flue with cleaning agent, and finally wipe it clean with cleaning agent.

The next step is to remove carbon. After smoking the bucket for many times, the ash will remain on the wall of the bucket bowl, which is getting thicker and thicker and needs to be cleaned regularly. You can use a professional carbon remover or pressure bar to cut off the residual soot in the pipeline. During excavation, do not damage the carbon cake or knock on the pipeline, which will cause the nozzle or bucket handle to crack.

5. Then replace the filter element. If the pipeline used has a filter element, please replace the filter element after cleaning the flue. Generally, about 3 buckets are used and need to be replaced.

6. External cleaning is basically the use of bucket cloth, bucket wax polishing and so on. Every part has professional maintenance, and then it can be wiped.