How to install a curtain ceiling? Room ceiling how to look good?

In the decoration project, the ceiling is an indispensable project, now there are a lot of friends in the decoration are more like to use the ceiling, there are a lot of types of ceiling on the market, curtain ceiling have you ever heard of it? Today we will introduce the curtain ceiling installation method and room ceiling how to look good, take a look.

One, curtain ceiling installation method

1, according to the design elevation in the surrounding wall bouncing line, bouncing line should be clear, accurate location, the level of the allowable deviation of 5mm.

2, along the elevation line fixed side of the keel, side of the keel's role is to the edge of the ceiling parts of the seal, side of the keel commonly used specifications for the 25 * 25mm, and its color and luster should be the same as the PVC buckled plate, side of the keel! The side keel should be the same color as the PVC button board, and it is fixed on the wall column with cement nails.

3, determine the location of the keel line, because each piece of PVC buckle plate is formed panel, generally can not be cut into pieces, in order to ensure that the integrity of the ceiling finish and the reliability of the installation, according to the size of the aluminum button board size specifications, as well as the size of the ceiling area to the arrangement of the ceiling skeleton of the structural dimensions. The basic arrangement of PVC buckle plate finish is: plate combination should be complete, the four sides of the edge, stay around the edge of the symmetry should be uniform, will arrange to arrange the position of the skeleton frame line drawn on the top of the elevation line.

4, the main keel hanging point spacing, according to the design of the recommended series selection, the middle part should be arched, keel arch height is not less than the room surface span 1/200. main keel installation should be corrected in time after the position and height. To control the leveling of the keel frame, first of all should pull out the vertical and horizontal elevation control line, starting from one end, while installing and adjusting the suspension height of the boom. After the large surface is leveled, then adjust some single keel with bending and warping, until the leveling meets the requirements.

5, the boom should be straight and have enough bearing capacity. When the boom needs to be long, must be lap welded, weld uniform full. Antirust treatment, boom from the end of the main keel shall not exceed 300mm, otherwise additional boom should be installed, so as to avoid the main keel falling, secondary keel (in the keel or small keel the same below) should be installed close to the main keel.

6, comprehensive correction of the position and level of the main and secondary keel. Connectors should be staggered installation, check the installed ceiling skeleton, should be firm and reliable, in line with the relevant norms before the next step of construction.

7, the installation of PVC buckle plate, should be the second bone straight. Buckle plate should be flat, not warped, ceiling plane leveling error shall not exceed 5mm.

Two, room ceiling how to do good look

Method one: do the ceiling around the bedroom, the middle does not do the ceiling. This ceiling can be molded with timber plywood, designed into a variety of shapes, and then with spotlights or downlights, in the middle part of the non-ceiling with a novel ceiling lamp. This will visually increase the height of the space, more suitable for large spaces in the living room.

Method two: the bedroom around the ceiling to do thick, while the middle part of the thin, so as to form two obvious levels. This approach should pay special attention to the molding design of the ceiling around the design process can also add your own ideas and preferences, so that the ceiling can be designed to have a modern flavor or traditional flavor of different styles.

Method 3: the use of gypsum around the ceiling in the bedroom to do modeling. Gypsum can be made into a variety of geometric patterns, or carved out of a variety of flowers, birds, insects and fish patterns, it has a cheap, simple construction and other characteristics, so the use of the ceiling in the bedroom is not a good way, as long as its decorative effect and the decorative style of the room in harmony, you can achieve a good overall effect.

Method 4: If your bedroom space height is abundant, then in the choice of ceiling, there is a lot of room. You can choose such as fiberglass board ceiling, plywood modeling ceiling, plywood modeling ceiling, gypsum sound-absorbing ceiling and many other and many other forms, these ceilings are not only in the shape of quite beautiful, but also has the function of reducing noise, is your ideal choice.

The above is all the knowledge about curtain ceiling installation method and how to make a good looking room ceiling introduced to you today. Now decorate a new room everyone likes the ceiling, the use of suspended ceilings to replace the traditional ceiling, increasing the overall beauty of the room. But in the choice of ceiling, must be careful and cautious oh, choose the right ceiling for your home is good.