How to change the belt of cygnet automatic washing machine? The belt is 0-445.

1. First, lay the washing machine flat so that the bottom slide can be easily removed. If there are screws, please remove them with a screwdriver. In the process of disassembly, be sure to remember the position of the original screw. You can see the base after disassembly.

2. Then, you can see that the screw is fixed on the movable rod. There is the same screw on the other side of the screw. Screw one first.

3. Try to see if the damaged belt can be removed. If not, please loosen the other screws.

In this way, you can slide the belt to take it off.

5. Then replace the belt. In this way, the belt replacement is completed. After changing, adjust the tightness, and the whole process is over.