How to put cotton shoes on the soles, and how to make handmade cloth slippers and soles.

Shoes need tools and articles: scissors, awls, clips, nylon ropes, soles and uppers.

The specific steps are as follows:

1. Fix the vamp on the sole and fix it from front to back with a clip, as shown in the figure:

2. Select the position of the lower needle, usually on the inside of the shoe, as shown in the figure:

3. Take the first stitch from the hemming strip at the found stitch position, and directly tie it on the sole with an awl, as shown in the figure:

4. Unfold the thread, hook it on the awl, pull out the awl, and pull out the thread, as shown in the figure:

5. Place the second needle at the position of the first needle 1cm, unfold the thread and hook it on the awl, pull out the awl and pull out the thread, as shown in the figure:

6. Thread the thread through the small circle drawn by the second needle, as shown in the figure:

7. As shown in the figure, tighten the two ropes with both hands:

8. Always lick the shoes like this, and finally tie two ropes at the bottom of the shoes, as shown in the figure:

9. Subtract the extra rope, so that the shoes are ready, as shown in the figure: