What are the risks of equipment import and transportation? How to prevent it? Thank you, everyone.

(1), transportation safety control 1, traffic control equipment must conduct traffic control during transportation, block roads and monitor the whole process; 2, running time, large equipment transportation must be carried out during the day; 3. Normal driving speed, transportation speed is controlled at (50Km/h), uneven road speed is controlled below 10km/h, and obstacle-crossing speed is controlled below 5Km/h; 4. Check before the vehicle starts. Before the vehicle starts, the equipment scooter and reinforcement must be inspected in detail to eliminate hidden dangers and recorded. The problem must be eliminated before starting; 5. Inspection in operation 5. 1 Shear wave inspection: When passing through the road surface with shear wave greater than 3%, it is necessary to correct the shear wave of the scooter to ensure that the equipment is in a relatively horizontal state; 5.2 longitudinal wave inspection: when passing a large longitudinal wave, correct the longitudinal wave of the scooter to ensure that the equipment is in a relatively horizontal state; 6. In the process of vehicle parking and transportation, parking at night or halfway must choose a place with solid and flat roads, wide roads and good sight, set up a warning line, be on alert, and send people to guard; When parking for a long time, it is necessary to support the track wood at the lower part of the main beam of the flat car to reduce the height of the flat car. When the main beam falls on the track wood, check the pressure gauge of the flat car to reduce the pressure. After the flat car stops, check the equipment binding and vehicle tires to eliminate hidden dangers in time; Closed or semi-closed traffic along the road; Take safety isolation measures when parking to remind other vehicles to pay attention to bypass. (2), transportation safety control to properly store and package transportation equipment, to prevent damage. The control of transportation should be carried out in four steps: verification of loading. Before shipment, the large-scale equipment transported must be inspected and accepted. Detailed rules for effective implementation-implementation of banding and reinforcement scheme; -Implement the acceptance terms as soon as the goods arrive. Select and maintain means of transport. Correct selection and maintenance of means of transport. Select the transportation route correctly (survey the route again before transportation to ensure that the transportation conditions are consistent with the actual situation, etc.). ). Personnel arrangement and assessment-clear personnel responsibilities; -The contents, functions and methods of using the detailed rules for publicity and education.