What is the direction of the integrated cabinet stove and the technical standard of the integrated cabinet countertop?

As we all know, the whole cabinet is one of the most upscale decorations in the kitchen. Its overall effect and high-grade appearance are worthy of unanimous praise from domestic and foreign owners. The production of stove is the most important step in the overall cabinet design. Then, what is the direction of the integrated kitchen range, and what is the standard of the integrated cabinet countertop technology? Below, I will give you a good introduction to the production direction of the overall cabinet cooker.

Furnace mouth direction

According to the five elements of feng shui, the stove itself belongs to fire, so the direction of the stove mouth should be chosen in the east, so as to coordinate with the wind direction; If your kitchen has windows, don't build a stove under the windowsill. Besides getting oil on the window easily, the fire is easily blown out by the wind, so anyone who uses it will regret this design.

Table length standard

Under normal circumstances, the length of a single countertop is generally less than 3 meters; If it exceeds this specification, it shall be determined by. To make up for it. The width of the mesa should be adjusted according to the length, generally based on 550 and 600, and the thickness is about 12.7 mm and 27 mm.

Table width standard

If the whole cabinet countertop is calculated from the bottom of the hanging cabinet, the high size is 600 mm and the low size is 500 mm, but the stainless steel countertop may be a little different. In order to fit the height of housewives, the width of the countertop should not be less than 900460 mm

Tank width standard

The width of the sink is limited by the width of the countertop, which determines the width of the sink. In the design, the width of the sink should be reduced by 100 mm on the basis of the width of the table, and the approximate range is between 500-600mm; For small huxing, 430-480 mm is also feasible.

Edge design

The edge of the whole cabinet countertop, such as marble and stainless steel, has sharp edges and corners, which has certain security risks. For example: small round edge, straight edge waterproof line, small round waterproof line, small hypotenuse waterproof line, etc. The edge part should be chamfered, so that it can have a certain radian, and it is not easy for the elderly and children at home to hurt people.