Wooden strings how to disk?

Question 1: How to plate wooden strings Hello

Just bought the string do not first hand plate, it is best to use labor insurance with white cotton gloves plate, about a week after the string has a certain brightness, turn to hand plate, remember that the hands do not have sweat, because the wooden strings will rise in the moisture, drying will make the wood grain coarse and even cracked. Plate play on the hand feel smooth and not astringent when the best, once the astringent hand has been sweating, do not have to disc. Otherwise, the more disk the more lusterless.

Strings accidentally stained with water, you should immediately dry and then use white cotton gloves to play a few days, can not be exposed to the sun or air drying. In addition, there are sweaty hands bead friends often plate string black but no luster, which is mainly due to sweat. The solution is that you can wear the string on the wrist, slide around the other arm (when wearing short sleeves in summer), can also make the string on the light.

As the law for a year or two, the string can produce a relatively stable pulp, especially rosewood, Huanghuali. The strings of goldenrod will have a glassy luster, which is very beautiful.

I hope the answer can help you

Question 2: wooden strings how to play wooden strings, it is recommended to use cotton gloves to play with the string beads brightly set aside for a few days to allow natural oxidation, and then repeat the above process, usually about three months, when the string feel smooth and delicate, such as touching the glass beads in general, at this time, it can be netted to play with the hands, pay attention to not touching water and chemicals class! The thing, for reference.

Question 3: how to disc boxwood strings first wear gloves disc for a week, followed by a week on the hand, and then placed half a week to a week, repeat the two or three steps, there is no hurry, to avoid dipping and sun exposure

Question 4: how to disc jujube strings wear scrubbers or gloves disc for a week, followed by a week on the hand, and then placed half a week to a week, repeat the two or three steps, there is no hurry, to avoid dipping and sun exposure, and do not stained with water, and do not get into the water. and exposure to the sun, and do not dip in cooking oil.

Question 5: how to disk cliff cypress string Hello

Cliff cypress string beads chain because of the wood is delicate and high oil content, disk when there is no need to put any oil.

The first step: the string of beads with the disk bead bag, each bead on the light rubbing. Do not need to disk kneading for a long time, there is time to knead, no time to stop, as you wish, let nature take its course. Note that the beads around the hole must be disk to. Disk rubbing a few days later, the string of beads basically light, then you can wear. Pay attention to each disk after it will be put into a sealed bag to cover.

The second step: the formation of pulp can be worn for a period of time, so that it naturally oxidizes, we also call this step "wake up beads", which allows the beads on the pulp to a certain degree of hardening, generally about a week, this period of time do not need to disc.

Step 3: Repeat the above process 5, 6 times, that is, two or three months time, you will see your beads very aura of luster. A well-disked bead will sometimes show a stronger reflection, and some like the luster of glass.

One special note: Cliff cypress beads should not be exposed to large amounts of moisture at any time. If the beads are dirty, you can use a slightly moist cotton cloth to wipe a few times, and then leave it for a while before disking. Disk when all areas of the beads try to disk, especially the hole.

Also, summer is a new hand cliff cypress bead string special time, not formed thick pulp cliff cypress bead string is not suitable for summer long time wear, you can wear two days and then static drying two days.

I hope the answer can help you

Question 6: how to maintain a kind of wooden strings have a glossy Wooden bead bracelets belong to the natural materials, pay attention to the maintenance, and even exaggerated that is like caring for babies in general care, so that the more the disk more good-looking, the more spiritual. For the general public, although you can not do that, the following introduction to the process of maintenance of Buddha beads bracelet common problems in the solution as well as some precautions. A Buddha bead bracelet no luster: wooden Buddha bead bracelet new hand after wearing the hair Wu not bright is a normal situation, this is because the new production of the Buddha bead bracelet is polished and polished, the surface is relatively bright at the beginning, but the surface of the human body skin sweat and oil attached to the surface of the Buddha beads, has not formed a stable pulp. At this time you need to play to make the wooden beads as soon as possible to form the pulp, of course, you can always wear it on the hand, time will naturally form the pulp, just not after playing the formation of the pulp so moisturizing. Rub the wooden ball can form the pulp (that is, the connoisseur mouth dish play), but does not mean that rub once or a few times can make it form, need to adhere to a period of time. It should be noted that some novice players like to use oil to raise wooden beads, this method is not suitable for all wooden beads, especially purple and yellow pear, itself is oily, do not need to oil. The correct method is to first use a soft cloth or wear gloves rubbing 1-2 weeks later, and then play with the hand plate (clean hands), about 1-3 months or so will form a pulp, pulp wrapped around each wooden bead, it is no longer afraid of water loss and discoloration. Recommended reading >>> Xiaoye Zitan string how to disk two wooden Buddha bead bracelet cracking: wood placed in the air moisture will be lost, exposure to the sun may produce dry cracking. Therefore wood strings should pay attention to avoid sun exposure, when not wearing, try to be able to put in a sealed pocket to save. Also consider applying pure olive oil to moisturize the wooden beads. (and does not apply to small-leaf rosewood beads and yellow rosewood beads and other oily wood beads) three Wooden beads on the pit: wooden beads bracelet on those so-called "pit" is the characteristics of the wood itself, not the production of the "flaws", it is the accurate name is It's exact name is: brown eye. Brown eye, refers to the wood in the growth of molding when born branching scars! Or a small groove with lines on the hardwood plane. The precautions of the first, do not wear other metal jewelry at the same time when wearing the Buddha bead bracelet, so as to avoid collision deformation. Second, avoid contact with water vapor and chemicals, don't wear swimming, especially in sea water. Third, if you have enough time, use cotton sassafras clean after wearing every day, put it into the jewelry box to save. Fourth, the Buddha bead bracelet due to wear and dust, you can use a soft brush dipped in toothpaste to scrub, after washing with cotton sassafras can be dry. Fifth, the maintenance of the Buddha bead bracelet should often touch the jewelry with your hands, will enhance the luster of the bracelet. Six, hand washing is best to remove it, soap contains alkaline substances will damage the Buddha beads and affect the luster of the Buddha beads. Seven, pay attention not to contact with acid, alkaline substances, to avoid cosmetics staining the Buddha beads. Eight, wear the bracelet in order, first wear, then wear the bracelet, to avoid wearing hooked to the clothes, resulting in the fall of the Buddha beads. Nine, carry a small jewelry bag, to avoid washing hands and remove the bracelet on the sink, accidentally fall to the ground broken.

I hope to help you

Question 7: Bodhi wood strings how to disk new string with gloves disk, preliminary clean up the surface of the beads! Almost disk a week or so can let the beads rest for a few days. The hand disk. Often use silk scarf disk can make the beads brighter. Summer is not recommended on the hand, there is the secretion of sweat and oil! Affect the beads color.

Question 8: how to plate the acid twig wood strings acid twig wood strings playing method

First of all, from the purchase, the purchase of the first to look at the quality of the material is good or bad, because a string of good quality of acid twig wood strings will be easier to play with, but also will become more beautiful some. The main thing to pay attention to when looking at the material quality is the density and oil. Brown eye small or can not be seen for the high density, the string looks very moist anti-gloss for the oil is good. Color uniformity can be, its color shades do not have to care, because the beads will oxidation, slowly the color will become darker, to the final color will be uniform.

Second, the beads selected, in order to make the beads more beautiful need to use cotton cloth to disk play, to the kind of smooth cloth without hair to disk. So that the sweat will not touch the beads, the string plate out will be more translucent, the surface is like wrapped in a layer of film feeling.

Third, the acid twig wood strings to play gently, not too intense, do not let the beads make a big impact sound. So that the hand will not be tired, and will not feel sour. More will not sweat the cloth to wet. Feel the cloth a little wet on the stop, do not disc, if the cloth is wet beads or indirect contact with the sweat, so the beads will still feel not bright, hair black. This disk out of the beads will not look good, so there is no need to disk on seven or eight hours a day. It is also important to give the beads a time to sizing themselves.

Fourth, everyone playing with the disc time ways and means will be different, the disc out of the effect will be different, but in the end the disc out of the results will be almost the same, generally use the cloth to disc play two to three months beads basically won't be in the drop color, the disc will have certain results, but the bead is far from pulp, because the pulp of the sour wood needs a very long time, not a few days a few months can be done things, the acidic wood is a very good, but it is also very good. The thing that can be done in a few days and months, the acid twig wood generally to pulp at least a few years of time.

Sour wood strings to play to this time is about the same, because the string bought back as a piece of jewelry is to be used to wear. When wearing it may find that it will still turn dark, it does not matter, a little cloth disk or two will return to the original luster. That is, a side wear side disk, usually wear in the hand, nothing when you can take down the disk to play a little. However, some friends just want to make their beads look good, wear or not wear as a secondary words, then you can continue to use the cloth to disk play, will be the more disk the brighter!

Fifth, beads usually do not dip in water. Acid twig wood is also wood, after water will make the beads internal humidity changes, which makes the beads will be easy to crack, and after water will also be black. If accidentally stained with water, immediately take a cloth to dry the water can be. Generally just started playing with the beads to pay special attention to it, disk over a period of time the beads will be much stronger, dipped in water after drying will not have much impact.

Six, try to avoid beads bump. Although the acid twig wood is very hard, but the bump will still appear scratches or small pits, which will affect the beauty, but also affect their mood, to that time if the beads in the back with the beads will also be different from the original ones.

Question nine: sandalwood strings how to disk wear cotton gloves disk play

Question ten: what wooden strings are better disk out of the effect Personally, I think the best sea yellow, the yellow is also good. Xiaoye Zitan old material can also disk, just a lot of time, need to spend several years.

As for how to disk, or ask Baidu it, more detailed