What is the working principle of x62w universal milling machine?

Hello, if you want to specifically ask the working principle of X62W milling machine, I'm afraid the answer is different, because only the units engaged in the production of X62W universal milling machine will be more clear. Now I will briefly talk about the working principle of universal milling machine (including X62W, of course).

Firstly, the drive motor of X62W universal milling machine is 7.5 kW, which is installed behind the machine tool. The motor is connected by flange, and the power is transmitted to the gearbox of the machine tool. The main gearbox adopts disc-type axial propulsion gearbox to reset and change speed, and the spindle speed can range from12 to 960 rpm.

Then, as long as the corresponding machine tool accessories are installed on the machine tool or the corresponding machine tool parts are removed, it has good universality, so it is called universal milling machine, 1. You can pull out the locating pin of the milling head of the machine tool, loosen the fastening bolt, and then rotate the tilting head to process the tilted workpiece. 2. The machine head can be removed, and a west milling disc (which belongs to processing tools and has national standards) can be installed in the cone hole. In this way, the machine tool is similar to a lathe, which can process the plane of the workpiece (called vertical machining in the industry). 3. This is the most critical point, and it is also the most prominent point of universal milling machine compared with other milling machines. Pull the upper beam to the corresponding position, install the punching tool, and use the turntable (machine tool accessories) or the indexing head (machine tool accessories) to mill sprockets, gears, bevel gears, turbines, etc. with any module (which must meet the size of the machine tool).

Finally, the machine tool belongs to three-point motion mode, that is, the workbench moves up and down, back and forth, left and right. According to Cartesian coordinate system theory, it can be defined as XYZ axial motion, which is mainly driven by a 3.5 kW motor. When the cutter moves, the electric switch will connect the clutch to the feed gear box, and the feed speed will be obtained through the disc speed change mechanism, and then transmitted to the screw rods of each axis of the machine tool to achieve the purpose of movement.

That's all. I haven't made a draft yet. A little messy. ...