How to deal with the gap between glass roof and wall

The gap between the glass roof and the wall is one of the common problems in the building, which will lead to moisture, rain leakage and other problems, affecting the comfort and safety of the indoor environment. Here are some ways to solve this problem:

1. Sealed with silica gel. Silica gel can be filled in the gap, and then evenly compacted and sealed with a hanging brush or a flat scraper. Silicone seal can not only prevent moisture from penetrating along the wall, but also its elasticity can adapt to the slight changes of glass and wall.

2. Use sealing strips. Sealing strip is a common sealing material, which can not only solve the crack problem, but also sound and heat insulation. After the sealing strip is attached, the upper and lower positions can be trimmed and adjusted according to actual needs.

3. Use waterproof tape. Waterproof tape is suitable for the joint between large-area glass roof and wall, which can effectively prevent rainwater from infiltrating. Waterproof glue has high viscosity and strong water resistance, and can be kept in good condition for a long time, and will not be broken or damaged due to wet environment.

4. Reinforce the corner. Because the corner between the glass roof and the wall is often hit and squeezed, it is easy to cause cracks and water leakage. Therefore, before installing the glass roof, the corner of the wall should be well treated, reinforced and cracked, which can effectively reduce the gap between the glass roof and the wall.

To sum up, there are many ways to deal with the gap between glass roof and wall, and it is necessary to choose the appropriate method according to the specific situation. When handling, we should pay attention to choosing waterproof, durable and easy-to-repair materials to ensure the integrity and safety of the joint between the glass roof and the wall.