Process steps of stone dry hanging Matters needing attention in stone dry hanging construction

Nowadays, many owners like to decorate the external wall with dry hanging stone, which is both beautiful and economical. More than one hundred are found in high-grade residential areas and villas, and stone dry-hanging building exterior walls are commonly used structures at present. What are the process steps of stone dry hanging and the matters needing attention in stone dry hanging construction? Today, we will take you to know the relevant knowledge.

1. What are the process steps of stone dry hanging?

1, measure and determine the position, and punch holes in the wall with an electric drill.

2. Prepare four expansion screws.

3. Knock the expansion screw into the punching hole with a hammer.

4. Install the expansion screw with a wrench.

5. Check whether the fasteners are completely fixed.

6. The distance of expansion screw depends on the size of marble.

7. You can set the slotting position by leaning the marble against the fastener.

8. insert the position.

9. After grooving, coat a lot of marble glue and polish it.

10, apply more glue.

1 1. Fix the marble after leveling.

12, the finished product is finished, and the effect is good.

Second, what are the precautions for stone dry hanging construction?

1. Pay-off must be carried out as required before construction, and pay-off must be accurate.

2. First, the embedded parts should be selected. If the wall is a shear wall, the expansion bolt can be directly embedded with iron pieces and then fixed. If the aerated concrete block wall is used, it must be fixed with through-wall screws.

3. When installing angle steel, it must conform to the stone typesetting size, and there must be no mistakes.

4. When selecting dry hanging, we must pay special attention to the length and quality, and we must control the length and quality.

5. At present, the stone in the domestic market is not very standard and the thickness is not enough, so we should pay special attention to the depth of grooving.

What are the advantages of dry hanging stone?

1. Compared with the traditional wet operation, the dry hanging method of back-bolted stone curtain wall saves the grouting process, effectively shortens the construction period, lightens the self-weight of the building, and thus effectively improves its seismic performance. In addition, the most important thing is that this technology can effectively prevent the infiltration pollution of saline-alkali pigments to stone during grouting, and can improve the decoration quality and aesthetic effect.

2. In the traditional technology, grouting is the main connection point, but the decorative board will expand with heat and contract with cold due to seasonal outdoor temperature difference changes, and may even fall off, which poses a threat to our personal safety. Compared with the first one, the construction technology of dry hanging stone can effectively prevent falling accidents.

3. The installation process of back-bolted dry hanging stone curtain wall can be used in conjunction with the installation process of glass curtain wall and metal decorative plate. At present, many large public buildings in China basically adopt the technology of dry hanging stone.

This paper introduces the related knowledge of stone dry hanging process steps and matters needing attention in stone dry hanging construction. If you want to buy stone, you should go to formal channels to buy it, so that the quality of the stone you buy can be guaranteed. Want to know more exciting information about home improvement, please continue to pay attention.