Patterns of embroidery tools

Flowers are divided into square and round shapes. There are three kinds of materials: wood, bamboo and plastic. There are two kinds of circular flower curtains: bamboo curtains and plastic curtains, which are divided into three types: large, medium and small. Large diameter 30 cm, medium diameter 20 cm, small diameter 12 cm. First of all, pay attention to the size of the pattern to choose the pattern. If the pattern is too big, it should be divided into several parts. Generally, the pattern area accounts for more than 1/2 of the apron area. The apron should be tightened and flattened, so that the embroidered flowers can be flat and not deformed. When putting on the pattern, you should pay attention to the following steps:

Step 1: Loosen the outer ring screw, lay the inner ring flat, lay the cloth flat on the inner ring flat, and then overlap the outer ring flat on the inner ring flat.

Step 2: flatten the folds of the cloth and tighten the screws.

Step three, then draw the steps flat, without any wrinkles. Pay attention to the warp and weft of the fabric, and the pattern of the fabric should not be inclined. Finally, tighten the screws.

Step 4, then check whether the hem is tight enough. The inspection method is to use a needle with a thread to pass through the cloth surface, and the cloth surface will make a bang when the thread is drawn out, which is appropriate.

The requirements of embroidered apron and circular embroidered apron are the same, and the embroidery of embroidered apron is generally larger than that of embroidered apron. Therefore, the tightness of the thread can be adjusted to ensure the warp and weft of the fabric, and the fabric pattern can not be tilted. Special attention should be paid to the firmness of the fabric at the pull line to prevent the thread from falling off and destroy the integrity of the fabric.