How to choose tools for novice putty scraping What are the putty scraping tools?

1. Main machinery and equipment that must be prepared: putty mixer. The first steel scraper is made of 0.5 1mm thick spring steel plate. Everyone must remember that the width is 5- 12cm and the length is 8- 10cm. Grind the upper part into an arc on the grinding wheel, and grind it into a fine mouth of 2mm, like the mouth of a kitchen knife, so that it is easy to scrape putty.

2. There are also important main tools. Everyone began to understand it. Putty scraper, 38 mm and 63 mm wide paint scraper, hard plastic bucket, yin and yang angle.

3. It is indispensable that the horn scraper is made of buffalo horn, with a wide and thin bottom and a certain inclination to improve its elasticity. Also pay attention. It gradually narrows and thickens upward and is smooth as a whole. When the head is curved, the thumb and four other fingers straddle the two surfaces of the scraper, so that the scraper is sandwiched between the thumb and forefinger. Only 1 ~ 2 scraping is allowed, first scraping downwards, then scraping upwards, and scraping all the putty in the holes and holes.