Do closet with what plate is good

Do closet generally commonly used panels are: solid wood, particle board, multi-layer solid wood, ecological board, density board.

1, solid wood: pure natural wood cut from the plate, natural texture, wear-resistant load-bearing, is currently a higher degree of environmental protection of a plate. However, just because it is a purely natural plate, so the cost is very high, the price is also the most expensive of all the plates. In addition, the density and hardness of solid wood panels are lower than man-made boards, poor nail grip, cabinet for a long time, the risk of deformation is higher.

2, multi-layer solid wood panels: wood cut into veneer or thin wood, after the glue hot-pressing bonding and the formation of panels, also known as plywood. Because it itself is a multi-layer construction, so the structure is stable, high hardness, strong load-bearing capacity. But the fatal flaw is poor toughness, easy to bend and deform, especially when doing height more than 1.5 meters of the cabinet, longitudinal stretch is too large, the chance of deformation is very high.

3, particle board: wood or lignocellulose as a material, after the adhesive hot pressing and synthetic panels. It is for this reason that its production cost is very low, coupled with the stability of the plate after pressing, strong and durable, so it has become the first choice of many customized closet brands of plate. However, the particle board is after all glued synthetic, there is inevitably formaldehyde pollution, so some businesses on the market to promote their own plate to achieve "zero formaldehyde", this is very false, do not believe it.

4, eco-board: fir as the core, melamine veneer veneer of a plate, in the market, some people also call it: melamine board / paint-free board. Because it is only on the surface of the wood pasted a layer of wood grain finish paper, with less glue, so there is not much pollution, high environmental protection. However, one of the defects of eco-board is uneven force, poor nail holding power, easy to chipping. Therefore, it is more suitable for cabinet panels, for closet panels, cost-effective is not high.

5, density board: wood fibers with glue bonded into the plate, the production cost is low but poor environmental protection, the only advantage is good toughness, not easy to deformation and cracking, is very suitable for cabinet doors.