Installation method of indoor wooden door

Door is one of the essential materials in decoration, but many owners know nothing about its installation process. For the choice of doors, many people will choose to install wooden doors. The installation of wooden doors seems simple, but small details still need attention. What are the installation methods of indoor wooden doors? Let's have a look.

Assembling door frame

The assembled door frame can be drilled at the upper end of the vertical frame with an electric drill on the smooth floor, and then the horizontal frame and the two vertical frames are connected with four round nails. It is recommended to use an electric drill with a diameter of 2.5mm; Fix both sides of the mullion with 6 connectors; Turn the assembled door frame upside down, and then fix six connectors with round nails; After the production is completed, preassemble the door leaf and door frame to ensure that the door and door frame meet the requirements.

The door frame is connected and fixed with the wall.

Put the assembled door frame into the door opening as a whole; Determine twelve drilling point on that wall by taking the nail holes of the connectors as point; Drill a hole in 12 with an electric hammer, and fix the connector on the wall with a round nail; The battens are embedded in the cracks to ensure proper tightness, so that the door frame is firmly connected with the wall.

Install the door leaf

Hook the hinge groove, so as not to damage the decorative surface of the door; When installing the hinge, guide the nail hole, and then tighten the wood screw; Install the door lock.

Installing electric wire for door cover

Fix the door cover and door rail on the door frame with round nails, and install the door cover wire with glue; The door cover line and the door stop bar are set at an oblique angle of 45 degrees.

Matters needing attention

Don't pull hard when splicing door frames, otherwise you must pay attention to the opening direction of the wooden door surface, otherwise the direction will be reversed after being busy for a long time, which is also a common mistake in installing doors. Wooden door installation is a very important process. If the installation quality is not up to standard, it will bring us a lot of trouble in the later stage, so any process can't be sloppy.