Traditional Culture Encyclopedia - Traditional festivals - Five tips to judge whether furniture is good or bad. Professionals teach you to identify furniture.
Five tips to judge whether furniture is good or bad. Professionals teach you to identify furniture.
how to judge whether a piece of furniture is good or defective? Let's give you an analysis and teach you some methods!
With the arrival of the home decoration boom, furniture shopping has also reached the peak season. Here, we remind Pan Bo consumers that before purchasing furniture, it is best to reserve knowledge in advance and learn some tips for selecting and identifying all kinds of furniture. Here, I have collected 5 tips for shopping, which I hope will help you.
the material structure should be fair
different furniture has different surface materials. For example, the legs of tables, chairs and cabinets require hard miscellaneous wood, which is relatively knotty and can bear the load, while other materials can be used for internal materials; The thickness of the legs of the wardrobe is required to reach 2.5 cm. If it is too thick, it will be clumsy, and if it is thin, it will easily bend and deform. Kitchen and bathroom cabinets can't be made of fiberboard, but should be made of plywood, because fiberboard will swell and be damaged when it meets water; The dining table should be washable.
if there are insect eyes and foam in the wood, it means that the drying is not complete. After checking the surface, open the cupboard door and drawer door to see if the contents are decayed. You can pinch it with your fingernail, which means that the contents are decayed. Smell it with your nose after opening the cupboard door. If it is flushed, dazzling and tearful, it means that the formaldehyde content in the adhesive is too high, which will be harmful to human body.
the moisture content is about 1%
the moisture content of furniture should not exceed 12%. If the moisture content is high, the wood will easily become warped and deformed. When purchasing, the average consumer does not have a test instrument, so he can touch the bottom of the furniture or the place where there is no paint. If he feels damp, the moisture content is at least 5% and he can't use it at all. Another way is to sprinkle a little water on the unpainted wood. If it is flooded slowly or not, it means that the water content is high.
Four-legged stability is the foundation
This point can be known when you put it on the flat ground, and some furniture only has three legs. Take a look at whether the desktop is straight or not, so you don't have to bow your back or collapse your waist. The desktop is prominent, and the glass plate will spin when placed; The tabletop is concave, and the glass plate will break when put on pressure. Pay attention to check the cupboard door, the parting of the drawer should not be too large, and it should be horizontal and vertical, and the door should not sag.
Only when the seams are tight can you pass the test
Whether you stick wood veneer, PVC or pre-painted paper, you should pay attention to whether the leather is flat, bulging, blistering and lax stitching.
when checking, you should look at the light, and you won't see it if you don't flush it. Fraxinus mandshurica veneer veneered furniture is easily damaged, and generally it can only be used for two years. As far as wood veneer is concerned, the veneer with shaved edge is better than that with rotary cutting. The way to distinguish the two is to look at the wood pattern. The wood grain of planed veneer is straight and dense, and the pattern of rotary veneer is curved and sparse. For particleboard-faced furniture, the landing department must seal the edge, otherwise the edge plate will absorb moisture, swell and be damaged. Generally, the corners of veneered furniture are easily tilted. When selecting, you can dig the corners by hand. If you dig them up, it means that there is a problem with glue.
Installation process of accessories
Check whether the door lock switch works; Large cabinets should be equipped with three hidden hinges, and some can't be equipped with only two; Three screws should be installed, some cut corners, only one screw is installed, and it will fall off when used.
of course, there are many other methods, which will be summarized for you slowly in the future!
- Previous article:How does Qingluo cloth drown pickles?
- Next article:What are included in the digital category
- Related articles
- What does it mean to show a handwritten report on Chinese New Year insights
- What is the significance of 3D printer in education and what can it do?
- Where is the Lantern Festival in tianjin railway station?
- How many stages do you think China's traditional culture is divided into? Who are the representatives and what are their main viewpoints?
- Simply look at the offensive ability, Curry can be in the top few in NBA history?
- Dry goods | How to build a bookshelf to look good?
- Flowering branches free key material - how to raise flowers at home should be raised flower arrangement
- 1999 Speech by the host of the class meeting on the theme of respecting the elderly on the Double Ninth Festival.
- The difference between cash and cash
- What ethnic groups are there in Putian, Fujian? Please write three, and write down the diet, clothing and customs of these three ethnic groups.