Advantages of how to install a three-dimensional parking lot

It brings great convenience to our life. But because of this, the saturation of cars is getting bigger and bigger, which leads to the shortage of ground and underground parking lots. In recent years, three-dimensional parking lots have entered our lives, which can reduce the pressure of parking. I don't know how to install the three-dimensional parking lot Nowadays, people choose cars in many ways. In fact, cars are getting closer and closer to our lives, which brings great convenience to our lives. But because of this, the saturation of cars is getting bigger and bigger, which leads to the shortage of ground and underground parking lots. In recent years, three-dimensional parking lots have entered our lives, which can reduce the pressure of parking. I want to know how to install the three-dimensional parking lot and what advantages it has. Many consumers don't know much about it. Let's have a look.

How to install a three-dimensional parking lot

1, according to the drawing requirements, excavate the foundation pit with a depth of 26cm and tamp it. According to the positioning and height dimensions of the drawings, six brick stacks with stable positioning shall be made at each foundation position. The track is placed on six brick stacks according to the positioning dimensions and error requirements of the drawings, and roughly leveled.

2. Insert the anchor bolt into the angle steel hole, and install a nut on the top and bottom of the angle steel, and the thread on the angle steel is 5cm high. According to the drawing requirements, prepare the bottom steel mesh and support the transverse steel bar on the cross section of the anchor bolt. Concrete of structural layer shall be poured and vibrated, and the concrete surface shall be 3cm away from the bottom of angle steel.

After 3.7 days, level the track and tighten the bottom corner bolt and the double nut on the tension side. According to the requirements, make up the upper steel mesh and install wooden patterns on both sides of the track. According to the requirements, the screed-coat concrete should be highly poured and compacted, with a polished surface and a slope at the front end. 4-6 Take out the wood grains on both sides of the track and trim the edges.

4. According to the drawing requirements, use 670mm long 10 channel steel to weld the fixed angle steel. According to the drawing requirements, two 5m long 30 # light rails and a 3560mm long rack are welded on the 10 channel steel, and the spacing of the channel steel is arranged according to the drawing requirements. According to the drawing, the welded crawler frame is fixed on the ground with the anchor bolts. Fix the rack on the rack fixing side according to the drawing requirements, and then install the rack dustproof plate.

5. Installation of mobile chassis: Install the mobile chassis on the mobile track. Installation of rotating column: connect the rotating spindle flange on the rotating seat at the front end of the mobile chassis with the rotating column flange, and install the rotating column on the mobile chassis. Installation of the bedplate column: align the bedplate column with the rotary column according to the drawing requirements, and fix the lifting bracket with the bedplate column with bolts.

6. Installation of bedplate: connect bedplate and bedplate column through bedplate flange and bedplate column flange. Installation of covers, covers, etc. : Assemble various covers, covers, tensioning wheels, tensioning springs and covers. Installation of electrical cabinet: wiring, assembly and debugging of various limit switches and induction switches. Equipment debugging: no-load operation, load operation and testing of various inductive switches.

Advantages of three-dimensional parking lot

1, the parking lot occupies a small space.

Traditional parking lots generally occupy a large area, and spaces for opening doors and pedestrians need to be reserved between parking spaces, but three-dimensional parking equipment is not needed, which can better reduce the occupied area and play a role in reusing land resources.

2. Excellent appearance

The design of three-dimensional parking lot can be said to be flexible and diverse, including circular and circular; Compared with the traditional underground garage, the new decorative materials give people a fresh feeling and a more atmospheric and beautiful appearance.

3. The parking method is simple

Generally, it is relatively simple to reverse the car in the parking lot. Basically, the driver only needs to drive the vehicle into the parking lot, and the automatic equipment in the parking lot will automatically adjust the vehicle. And the entrance and exit of the three-dimensional parking lot is spacious, which is convenient for drivers to enter and exit, while the traditional parking lot needs the driver's superb parking technology to pour the vehicles into the corresponding parking spaces.

How to install a three-dimensional parking lot? Before installing the three-dimensional parking permit, it is necessary to measure the ground foundation, track laying and mobile chassis installation. Installation must be carried out in accordance with specific regulations and specifications. Three-dimensional parking still has many advantages. The parking lot occupies small space, has excellent appearance and is convenient and simple to park. This is the advantage of a three-dimensional parking lot. Through this article, you can know something about the three-dimensional parking lot.