How to make firecrackers with paper

The steps of making firecrackers with paper:

Step 1: Make firecrackers.

1. Prepare red square colored paper and yellow slender colored paper with the same side length as the square colored paper. Take 1 square colored paper +2 yellow sheets.

2. Stick double-sided tape on the yellow colored paper and stick it on the upper and lower edges of the square colored paper respectively.

3. Turn to the back and stick double-sided tape on the side perpendicular to the yellow edge.

4. Tear off the double-sided adhesive tape, as shown below. Stick the two sides of the square colored paper together to form a cylinder, and a firecracker will be ready.

5. Make 10-20 firecrackers according to the above steps, and the firecrackers will be ready.

Step 2: Make tassels.

1. Take a piece of red square colored paper and stick double-sided tape on one side. A rectangular piece of paper will do. If it is rectangular colored paper, double-sided tape should be attached to the longer side).

2. Cut the colored paper into strips with scissors, and be careful not to cut it.

3. Take a needle to thread the needle. Tear off the double-sided tape on the colored paper, stick the end of the needle and thread on the double-sided tape vertically, and roll up the colored paper to make the tassel prototype.

Take a piece of yellow paper and stick double-sided tape on it.

5. Stick a yellow note on the tassel.

6. Wear firecrackers with needle and thread, and the second step is completed.

Step 3: Write the word "Fu".

1. Take two pieces of red square colored paper and write the word "Fu" on them.

2. Turn the word "Fu" to the back and stick double-sided tape along the direction of the square color line, that is, along the direction of the word.

3. Tear off the double-sided tape, stick a needle and thread, and then stick a blessing, and the handmade firecrackers will be ready.