What are the precautions in the process of decoration and bricklaying?

1. Tile starting point. This starting point is very important. The starting point is the place where the first complete tile is laid, which involves the important position of the tile layout of your whole house and the visual integrity of the tiles. The family used plane software to draw the layout of the whole house, and also determined that the starting point was at the junction of the kitchen and the living room, and the kitchen tiles were laid, so that from the porch to the living room, from the living room to the kitchen, they were all complete tiles, with little cutting waste.

The doors of kitchen and bathroom are covered. Some friends must have doubts about the relationship between kitchen and bathroom packages and bricklayers. This matters a lot. If you choose a small partner with a single package, you must reach an agreement with the bricklayer in advance to let him wrap a part of the doorway with tiles, so that at the junction of latex paint wall and tiles, you can wrap the edge of the doorway with a single package, and the cost of titanium-magnesium alloy double-package doorway will increase, as well as the construction cost.

3. Waterproof coating. It should be emphasized that the waterproof wall should be both rigid and flexible, and the shower area should be painted to 1.8m, and other areas should be 0.3m, so as to prevent later moisture regain.

4. Seam from wall to ground. My kitchen uses 400*800 wall tiles, the floor uses 800*800 floor tiles, the bathroom uses 400*800 wall tiles, and the floor uses 400*400 floor tiles, which is just a multiple relationship, so the seam from the wall to the floor will be visually comfortable.

5. Bedroom floor thickness. My living room is made of tiles and my bedroom is made of floor. Be sure to tell the bricklayer the thickness of the bedroom floor in advance so that he can find the height difference with cement mortar, so that the floor can be flush with the living room after paving.

6. A threshold stone. More and more people choose not to use lintels when laying tiles, so we should explain the treatment method of transition zone to bricklayers in advance, because my bathroom is in the porch corridor, which will not affect the overall beauty. I used a lintel as a transition between two sizes, and the bedroom tiles were normal. There is a knowledge point here, that is, the metal strips should be trimmed and 2CM away from the door, so that you can't see the tiles when you close the bedroom and the floor when you close the living room.

7. This wall holds down the ground. Specially guide the bricklayer to use the technology of sticking to the wall and pressing the ground, which will have better moisture protection for the ground.

8. Niche height. My niche is placed next to the toilet, and the height must adapt to the sitting position. I can take the height at will and set a shelf every 40CM to meet the aesthetic requirements.

9. Floor drain installation. Washing machine, shower area, wall row +t-shaped dry area. Every floor drain and bricklayer should explain that the shower area requires sawtooth shape, which is more convenient to guide water. The floor drain in dry area is invisible and has invisible effect.