How to make tightening ring and tightening sleeve respectively?

How to make a tightening ring:

1. First, fold the rope in half as shown below.

2. Wrap the slightly shorter end of the rope around three times as shown.

3, after three circles, pass the end of the rope through the circle reserved behind the hand, as shown in the picture below.

4. When the rope is threaded out, it will look like a knot like the one in the picture below.

5, will be slightly tight rope, here need to pay attention to the rope is not to pull the two heads, thumb hold down the top of the circle, hand pull through the bottom of the rope.

6, put your fingers through the mouth of the live button to pull the other end of the rope this knot will automatically lock tight, the more struggle the tighter.

Tighten the bondage set practice:

1, take a rope and its head and tail, folded into a multi-stranded rope loop, so that the multi-stranded rope loop caliber just through the wrists of both hands, then gradually adjust the length of the rope loop according to the size of the individual wrist.

2, the rope end of the tightly bound set, that is, the remaining rope of the noose, tied to the middle of the ankles of both feet tied rope, so that the tightly bound set and feet connected.

3. Cut your hands behind your back and put your wrists into the two sleeves of the noose.

4, the remaining rope length of the tightly bound set can be set to the distance from the belly button to the knee, while adjusting according to the actual situation.

Extended information

The tightening ring is to be used for the bolting of items on trucks, trailers, ships or rails and the bundling and bolting of items of steel, timber and all kinds of tubes.

Tightening ring structure in various forms, according to the actual need without end parts of the long exposure to ultraviolet radiation when the bolting belt strength will be reduced, so the bolting belt should not be used in the ultraviolet radiation in the place of strong for too long. The bolt tightener to avoid molten metal, acid, glass plate, fragile items, nuclear reactors and special environmental operations.