Making a dragon head centipede kite

＊The following describes the process of making a centipede kite.1, use bamboo strips to tie a circle with a diameter of 17 centimeters.2, make two ears and eyes on the outer frame.3, take a piece of thick paper.4, roll it into a circle, and paste half of an eyeball on each side of the circle.5, put the two eyes on a string, and make it into a rotating movable eye.6, tie it to form a centipede's head.7, tie the skeleton of the body into a circle with a diameter of 17 centimeters, and make it into a few sections. Take a bamboo stick as a balance pole (length 69cm), tie three to four rooster tail hairs on both sides of the pole, the distance between the two sides should be equal. 9. Paste nylon cloth on it. 10. Tail of the centipede. 11. The distance between each section of the connecting lines should be 37cm each, and the three connecting lines should be of the same length, not short or long. 12. Tie on three lifting lines, one at the top of the head and two on each side of the head. 13. The process of making this kite is from the book "Chinese Kites" by Grandpa Xie Jinjian.