Yuba switch is broken. After disassembling, there are five wires in it. I bought an ordinary four-way switch. How to connect?

Hello! \x0d\ First, find the only live wire among the five wires, then connect this live wire to the first terminal of the four switches, and then connect it to the same terminal of the second switch of the four switches with a very short wire from this terminal, and connect it to the third switch from the second switch, and the third switch to the fourth switch. \x0d\ Connect the remaining four wires to the remaining terminals of each switch one by one. There is no line sequence, just remember which switch controls which when controlling. You can also adjust these four lines appropriately to achieve the control sequence you want. \x0d\ Please pay attention to personal safety when operating. Please operate after disconnecting the main power switch!