Traditional Culture Encyclopedia - Traditional stories - All kinds of lamps and lanterns installation method Lamps and lanterns installation suggestions

All kinds of lamps and lanterns installation method Lamps and lanterns installation suggestions

Every day when the sun sets, in the city of mankind, the lights come on and shine brightly. This, then, is our eternal guardian of light: the lamp! When it comes to the types of lights, seen and unseen, countless, generally speaking, we commonly used at home lights are divided into four categories: chandeliers, downlights, wall lamps, ceiling lamps. But look good, how to install, and should need to pay attention to what? Many people in their daily lives for the category of lights, the installation of the precautions do not know anything about, below, I will give you a small introduction to the home commonly used in a variety of lamps and lanterns installed in the 4 major precautions and some installation recommendations it.

A chandelier installation

Chandeliers are generally installed in the living room in the central part of the dining room with the top of the table, chandelier installation method can be briefly described as the following two steps:

1, chandelier fixing first of all, also draw the drilling point, the use of impact drills to make holes, and then will be the expansion of screws into the hole. It is worth noting that, because the weight of the chandelier is generally greater than the ceiling lamp, to first use the metal hanging plate or hooks to fix the ceiling, and then connect the chandelier base, which can make the installation of chandeliers more solid.

2, screw on the bald screws, the base is installed. Connect the power cord, the exposed part of the copper wire is wrapped with insulating tape. Then connect the boom to the base and adjust the right height. Finally, the pendant lampshade and light bulb can be installed.

Lighting Installation Suggestions

a, when installed on the concrete roof, you can use pre-embedded parts, penetrating bolts and expanding bolts to fasten.

b, single-head ceiling expansion bolts can not be less than the minimum specifications of 6 mm, multi-head chandelier can not be less than 8 mm, the number of bolts at least 2.

c, chandelier and how to pick the specifications of the expansion bolts need to be based on the weight of the lamps and lanterns to decide.

Second, downlight installation (also known as spotlights)

Downlight installation is generally embedded in the ceiling, so in the ceiling at the time of the downlight installation in the reserved downlight installation location, plan to reserve the line, or directly in the ceiling when the installation of downlights. Downlight installation method can be briefly described as the following steps:

1, according to the lighting requirements and downlight size, installation location in the ceiling line on the ceiling to let the ceiling master reserved installation location with planning line reserved line

2, in the spotlight at the empty slot on the base, pull out the wires, on the fixing screws. Connect the wires, while not forgetting the insulation treatment, and finally install the spotlight part.

Installation advice:

a, pay attention to the reserved downlight position to be consistent with the purchased downlight height (and ceiling thickness).

b, after installing the downlight to test whether the line in the leakage phenomenon.

Third, ceiling light installation

Ceiling light installation is generally not installed with the ceiling in the same space, if the hall has a ceiling there is no need to install ceiling lights, ceiling light installation in the room, corridor, stairwell, storage room, balcony is more common, ceiling light installation steps are probably as follows:

1, first put the chassis on the roof First, put the chassis on the roof, according to the fixed position of the drawing of the location of the holes, use the impact drill in the position to be installed holes. Use a hammer to fill this hole with fixings such as expansion screws, it should be noted that the carrying capacity of the fixings should match the weight of the ceiling light to ensure that the ceiling light is fixed firmly.

2, get the roof wires out of the hole in the chassis, and fix the chassis with screws in the above position. After fixing, connect the wires and the wires of the chassis, wrap the exposed place of the wire connection with insulating tape, and finally install the lamp and lampshade.

Installation suggestions:

a, pick the specifications of the expansion bolts need to be based on the size and shape of the base of the lamp and the weight of the lamp to decide.

b, the use of wood screws to fasten the ceiling lamp, the number of wood screws should not be less than the number of mounting holes given to the lamp.

c, when using expansion bolts to fasten the ceiling lamp, the diameter of the base of the ceiling lamp is more than 100 millimeters, the diameter of the bolt should not be less than 6 millimeters, and must be fastened with two screws.

Fourth, wall lamp installation

Wall lamp installation of most ornamental lamps and lanterns, generally installed in the corner of the stairs, or balcony on both sides of the wall, or detached (such as villas) of the children's shoes on both sides of the front door, the side of the fence, both sides of the bed, and so on, the wall lamps to install the simple steps:

First fixed the base platform, and then fix the wall lamp in the The base platform, and then use the lamp position box mounting screw holes screwed to fix, can also be punched in the wall, pre-buried wood tiles or plastic expansion screws to fix

Installation recommendations:

a, installation height: Ceiling wall lamps, then, the center of the lamps and lanterns is generally from the ground 2m ~ 2.2m;

b, the installation height: Bedside wall lamps, then 1.2m ~ 1.4m is appropriate.

These are the above is small to bring you a variety of lamps commonly used at home to install the 4 precautions and installation recommendations, I hope to be able to help you, deepen the understanding of the lamps and lanterns, to bring greater convenience for life, in order to use to solve the problem when it comes to the time. The decorative effect of lamps is very good, now there are various types of lamps on the market, so you should know more, according to their own personal preferences to choose their own summer favorite types of lamps. Thus adding the necessary color to everyone's life.