What role can the automatic edge banding machine play in edge banding of sheet metal?

The automatic edge banding machine can re-decorate the ripple, burr or non-vertical phenomenon caused by uneven or sawing of the plate, so that the edge banding interface of the plate is flat, and the edge banding strip is closely combined with the plate to achieve better edge banding effect. Through special arrangement and structure, the automatic edge banding machine bonds the processed workpiece and edge banding on both sides, which makes the adhesion between edge banding and plate stronger.

All automatic edge banding machines are equipped with special linear guide rails. Through the movement of the precise linear guide rail, the flatness of the edge sealing surface of the edge sealing plate is ensured, and a good edge sealing effect is achieved. Edge banding machine is equipped with rough cutter and fine cutter. During edge sealing, automatic tracking and high-frequency high-speed motor structure are used to trim the upper and lower redundant edge sealing strips on the edge sealing plate, so that the width of the edge sealing strips is the same as that of the edge sealing plate. The automatic edge banding machine can also scrape off the ripple marks produced in the process of curve edge banding, thus ensuring the flatness of the edge banding and surrounding parts of the plate.

The automatic edge banding machine can polish the edge banding plate, so that the edge banding plate has better color and smoothness. It can also be used for slotting. This function is generally used for directly slotting the side plates and bottom plates of wardrobes, and can also be used for slotting the aluminum edges of door panels.

The main advantage of automatic edge banding machine is that it can realize automatic production through preset software mode, help manufacturers save costs, realize intelligent production and improve production efficiency.

Advantages of automatic edge banding machine.

1. No glue leakage. When traditional furniture is edge-sealed by hand, glue leakage often occurs due to improper operation, which causes a lot of waste of raw materials and reduces the edge-sealing quality of furniture. When using the automatic edge banding machine, there will be no glue leakage at all, saving a lot of raw materials.

2. Easy to clean. Traditional hand-made furniture edge sealing, due to various reasons, often leads to glue spilling everywhere. Sometimes even the furniture will be stained with a lot of glue, which is not conducive to the beauty of the furniture and will also encounter difficulties in cleaning. After using the automatic edge banding machine, the machine can be cleaned regularly, and sometimes the automatic edge banding machine can be cleaned while running without affecting the production line.

3. Less failures. When traditional handmade furniture is edge-sealed, the edge-sealing efficiency is affected by the edge-sealing operator. Many artificial reasons will lead to the quality and efficiency of edge sealing, which is not conducive to the development of furniture industry. The automatic edge banding machine will not be affected by human factors, and there are fewer machine failures, which greatly improves the efficiency of the furniture edge banding machine.

4. Sol is not easy to age. When the edge is sealed by hand, because the glue is not taken in time, it is easy to cause sol aging and affect the edge sealing quality of furniture. The automatic edge banding machine won't cause such trouble at all.