How to open the front cover of a car There are many ways to open the front cover of a car.

Automobile hood switch is divided into handle type and key type. The hood switch of almost all vehicles is located in the left panel of the center console, and some models are lower in design, located in the lower left corner and closer to the left foot. No matter where the switch is, as long as we look for the logo of the range hood switch, as shown in the figure, it is right to find it.

Just pull up the handle switch; As long as you press the button switch, after the first step is completed, the hood of the car will pop up slightly, revealing a gap of about 3-5 cm.

At this time, the hood has not been fully opened, and there is a safety buckle under the hood. If you want to open the hood completely, you must reach in and pull the safety buckle to lift the hood.

After opening the hood, take out the hood support rod and put one end of the hood support rod into the support notch to support the hood. If the hood is equipped with a hydraulic support, it is not necessary to support the hood manually.

The correlation is as follows

Closing the hood is relatively simple:

Hold the hood by hand, then lower the support rod (hydraulic support does not need this step), and then lower the hood slowly. At this time, the hood has not been locked with the safety buckle. We have to put our hands right above the hood and press it gently, and the hood can be closed.