Waiting online ~ What does the machine tool code CA6 140 mean ~ ~ ~

C stands for lathe, and A stands for structural feature code, indicating the first major improvement; 6 stands for floor and ordinary lathe; 1 stands for ordinary lathe; 40 is the main parameter of the machine tool; Rotary diameter 400 mm?

The meaning of the first digit of lathe, 0 stands for instrument lathe, 1 stands for single-axis automatic lathe, 2 stands for multi-axis automatic semi-automatic lathe, 3 stands for hexagonal lathe, 4 stands for crankshaft camshaft lathe, 5 stands for vertical lathe, 6 stands for floor lathe and ordinary lathe, 7 stands for multi-tool and copying lathe, 8 stands for wheel, shaft, spindle, roller and shovel lathe, and 9 stands for other lathes.

Extended data

1.CA6 140 is an improved horizontal lathe based on the original C620 common machine tool. C stands for lathe A as the structural characteristic code to distinguish C6 140, 6 stands for horizontal type, 1 stands for basic type, and 40 stands for maximum rotary diameter, which is one of the equipment needed by mechanical equipment manufacturing enterprises.

2. The CA6 140 lathe system consists of Siemens 802S system, interface circuit, drive circuit and stepping motor. In addition, it is equipped with automatic turret tool rest, spindle frequency conversion governor and spindle encoder. The system is an open-loop control system. Its main technical performance and parameters are as follows:

1, system control section. Siemens 802S system is adopted, and the keyboard and display part are installed on the panel.

2. The system software has several instructions. There are five machining instructions: straight line, oblique line, thread, taper thread and arc. It can realize the operations of turning excircle, end face, step, slotting, taper, chamfering, thread, parallel arc and reverse arc. Control instructions include ending the cycle, pausing, delaying, delaying tool change, coding tool change, communication, etc. With machining instructions, you can machine all kinds of complex parts.

3. Working conditions of the system environment. Temperature-10 ~+40℃; The humidity is 40% ~80%.

4. Input the grid voltage. Ac (220 22) volts; The frequency is 50Hz and the current is 1 5A.

5. Step motor. There are two BYG550C-2 motors, the driving voltage is 1 10V, the phase current is 2 5A, the step angle is 0.36/step, and the static distance is 12N.

References:

Baidu Encyclopedia -CA6 140 Lathe