What are the architectural carpentry drawing symbols and descriptions?

1 Board B?

2 Roof Board WB?

3 Hollow Board KB?

4 Slot Row Board CB?

5 Folded Board ZB?

6 Dense Rib Board MB?

7 Stair Board TB?

8 Cover or Gutter Cover GB?

9 Rain Barrier or Soffit YB?

10 Crane Safety Walkway Board DB? p>

10 crane safety walkway board DB?

Woodworking with the drawings is the combination of structural and architectural drawings to see, and sometimes also refer to the node details. Understand the plane, elevation, section and detail drawings of the representation and reading method.

I, construction drawings is the basis for building houses, is the "language of engineering", it clearly specifies what kind of building to build a building, and specifies the shape, size, practice and technical requirements. In addition to more contact with the drawings of this type of work, and sometimes combined with the entire project drawings to see the map, in order to cross-circle cooperation, no error.

Two, only step by step, in order to understand the design intent, read the design drawings, that is to say, generally should do "first read the description of the map; the order of the best for the flat, vertical, sectional; check the nodes and samples; architectural and structural control to read", so as to receive twice the result with half the effort.

Three, to understand the section of the map of the literacy method, when looking at the map must have the ability to spatial imagination, that is to say, to see a picture in your mind basically understand what style.

Four, all the drawings have a common place, most of them are composed of size, deviation, graphic structure, etc. First of all, it is necessary to look at what it is the graphic, to do is what kind of structure, size between the interval, spacing, where the loss of the actual value to be calculated.

Fifth, to see the floor plan of the building, to understand the shape and size of the house plan, the arrangement of the various rooms and transportation arrangements, as well as the location of doors and windows, the formation of a plan concept of the building, to see the elevation drawings, sectional drawings to lay a good foundation.

Sixth, look at elevation drawings, you should first understand the orientation of the building, the number of floors and changes in floor height, as well as windows, doors, external decorative requirements, etc.; look at section drawings, you should understand the section part of the elevation of the various parts of the changes in elevation and the indoor situation; and finally look at the structural drawings, you should understand the plan, elevation drawings, sections, etc., architectural drawings and structural drawings, deepen the understanding of the whole project.