Design method of glazed tile roof shape What are the glazed tile roof shapes?

Glazed tile is a kind of tile that many buildings like to use now. Because it is light and can make many shapes, it is favored by many friends. Even the roof of the villa likes to use glazed tiles. So how much do you know about the design method of glazed tile roof? Let's take a look at the design method of glazed tile roof shape. What are the glazed tile roof shapes?

Modeling design method of glazed tile roof

1, glazed tile facing brick, if any, shall be constructed according to the requirements of drawings.

2. When the glazed tile roof is made of wood structure, the cross-sectional area of hanging tile is 20X29mm, and anti-corrosion treatment should be done before construction.

3. The concrete roof can be hung with battens or cement, and the size of battens is about 25X25mm. Roof cement slurry plane is constructed according to building codes. The smaller the plane error, the better the roof tile effect. (The spacing dimension of battens shall be subject to the actual situation).

4. According to the shape, there will be some structures that need to be cut.

5. The maximum over-distance of cornice tile should be ≤ 10mm, and it should be pasted with 1: 1 cement slurry, but there should be gaps in the longitudinal direction.

6, hanging tile spacing is determined according to the actual size of the back. It should not be too long or too short to affect the construction.

7. During glazed tile construction, it is forbidden to stick cement slurry on the brick surface. If any, it should be wiped off immediately to avoid affecting the decorative effect.

8. It is suggested that the roof slope should be steep to avoid peace.

9, hanging tile nails and safety nails need to be fully used, especially in areas with typhoons. Stainless steel wire or copper wire can also be used instead.

What are the shapes of glazed tile roofs?

1. During the construction of glazed tile roof of villa, the first thing to do is to clean the base, and then cement mortar leveling, glazed tile paving, roof tile paving, maintenance, inspection and acceptance.

2. When cleaning the base, the surface of the base must be cleaned, especially the sundries in the gutter, downpipe and exhaust pipeline.

3, cement mortar leveling must wipe 1: 3 cement mortar, wipe with a wooden trowel rub flat.

4, according to the arrangement of the roof flashing, generally from the roof and watershed, and then along the vertical and horizontal directions of pre-drainage.

5. When laying glazed tiles, the central axis should be arranged from bottom to top and from left to right according to the site setting-out positioning.

6. When laying roof tiles, we should start from the bottom of the inclined roof and work from bottom to top. The big head tile of the ridge tile should be close to the "flight safety tips". Pay attention to the cornice when traveling safely, and fix the roof tile with cement mortar mixed with pigment.

At the other end

Glazed tile is one of the most commonly used building materials. When choosing this type of material, everyone needs to know how to design it. Of course, when designing, everyone needs to know what kind of glazed tile is suitable for their house. More importantly, how to design the roof correctly is also the most critical part of making the roof with glazed tiles. The above is the design method of glazed tile roof modeling introduced by Bian Xiao today and what glazed tile roof modeling is over.