How to paste the wood paneling diagram on the cement mortar

1, the board on the wall of the adhesion requirements are high, tile adhesive to high-quality cement and high-quality quartz sand and polymer adhesive as the main material, coupled with a variety of accurately proportioned additives by the mixing machine mixing and blending of powdered adhesive materials, the product has a certain degree of flexibility, a fundamental solution to the existence of cracking in the building decoration and decoration, drums, peeling, as well as leakage and other ills.

2, now use now add a certain amount of water and tile adhesive and can be described as instant coffee, the product does not contain free formaldehyde, benzene, toluene, xylene and total volatile organic compounds, is a green product.

3, specific steps: let the tiles stick to the board, structural adhesive plus mica adhesive stirred at a ratio of 1:1, and then paste the tiles in the woodworking board can be used, with wire mesh and cement, white cement, but can not see water, because of its poor waterproofing.

Expanded information:

Precautions

1, cement mortar in the use of cement mortar, but also often mixed with some additives such as micro-foam agent, waterproofing powder, etc., to improve the its compatibility and viscosity.

2, cement mortar in proportion to the addition of stone, it becomes concrete.

3, cement mortar standard strength means, according to the standard method of production and maintenance of 7.07CMX7.07CMX7.07CM square cube specimens, in 28d age, measured by standard test methods of compressive strength in the overall distribution of a value.

4, 100 cement mortar means that its strength is 100Kg/cm3, all changed to MPa for the unit, 100 corresponds to M10. ratio according to different raw materials, mortar use is different, to the commonly used 42.5 ordinary silicate cement, sand 100 (M10) masonry mortar as an example: per cubic meter of mortar ratio for cement 305kg: sand 1.10m3: 183 water. 1.10m3: 183kg of water.