How to install the large-scale inkjet hanger on the wall?

The specific methods of large-scale inkjet suspension are as follows.

1: Advertise the iron frame on the wall first.

According to the actual situation on the spot, welding and installing an iron frame on the wall is suitable for long-term advertising, and the inkjet advertising cloth can be changed frequently. The cost of investment should be large and small. It can be said that one-time investment can get long-term benefits.

2. Nail the wooden frame to the wall.

It is to nail a box on the wall by punching a hole in the wall with an electric hammer, stuffing it into the wood, and then nailing the wooden strips. In this way, the wooden strips around were nailed, that is, the four sides of the advertising cloth were sprayed. Finally, nail the spray-painted advertising cloth to the wood, starting from the top edge. The advantages are low cost, and the printed advertising cloth is firm and flat. The disadvantage is that there are holes in the wall, which is suitable for indoor installation. If installed outdoors, the wood will rot in less than a year.

3. Nail the spray-painted advertising cloth directly to the wall with cement nails, and nail it to the wall along the periphery of the spray-painted advertisement. The installation method of small-sized inkjet advertising cloth is much simpler than that of large-sized inkjet advertising cloth. No matter what method, the inkjet advertising cloth is leveled.