Wigwam project construction steps

1, positioning sampling: according to the drawings, models and site conditions for positioning sampling.

2, embedded parts buried: cast-in-place slabs using 70 * 100 * 6 embedded parts, spacing 1.5-2.5m buried; frame columns using 70 * 100 * 6 embedded parts, spacing 2m buried.

3, skeleton production: the main material for the 50 * 50 * 5 angle, the secondary place with 30-30-3 angle, painted with antirust paint for rust treatment, the first plastic square skeleton production, skeleton angle spacing size is generally controlled in the 1.8-2.5m or so, connecting the use of welding, and then according to the model of the left and right diagonal pull, to make the general shape of the rockery.

4, reinforcing steel mesh: in the skeleton production is completed, with 76 round steel for the production of reinforcing steel mesh, reinforcing steel mesh and angle steel connection and reinforcing steel and reinforcing steel connection are welded, reinforcing steel mesh square control in the 18 * 18-25 * 25cm2 or so, according to the model to shape the natural shape of the bumpy ups and downs.

5, barbed wire mesh: after the completion of the production of reinforcing steel mesh, the specification of 3 * 1/4 (4 mesh) wire mesh tied on top of it.

6, plastering: after the completion of the installation of barbed wire mesh, the grass-roots level plastering with 1:1 cement mortar, the thickness of 1-1.5cm or so, once completed, the second plastering, the thickness of 1.5cm or so. In the wigwam exposed part of the two layers of plastering is completed, in time for the wigwam internal mortar plastering, the thickness is about 1cm.

7, modeling: according to the model and the material of the created rock, the plastic rock wigwam is modeled, molded stone veins and stripes.

8, coloring: according to the location of the shaped rock and its role, choose the appropriate iron oxide pigment modulation, coloring.