What do carpenters need to know?

Woodworking stage is another key link after hydropower stage, and it also involves the construction of various spaces, such as doors, door covers, wardrobes and cabinets. Therefore, the emphasis on carpentry actually reflects the emphasis on the details of decoration.

1, dry larch is the best ground keel.

2. After buying a big board, you should saw it and dry it.

3. Carpenter should play the horizontal line of the house first.

4. As soon as the color board comes in, you should buy a paint bucket to brush it to prevent it from getting dirty.

5. The ceiling fan cannot be installed on the ceiling keel.

6, color panel construction to choose color in advance.

7, ceiling hanger distance from the wall shall not be greater than 300.

8. Gypsum board should be fixed with countersunk head tapping screws, and extend into the panel 1~2MM, and be rusted. Nails are not allowed.

9. The distance between gypsum board nails shall not be greater than 200.

10, Yuba should be installed on the wooden keel, not directly on the ceiling.

1 1, gypsum board should be treated with 3MM joint with the wall for crack prevention.

12, it is best to protect the external corner of gypsum board.

13, stir-fry the wooden door and paint it.

14, the bottom of the toilet door cover should be painted with a waterproof layer.

15, the size of the door should be consistent.

16, it's best not to let carpenters make furniture, which can't be done well.

17, try to buy a whole cabinet, carpentry is not good, design is not good.

18, hinges and hardware must be used well.

19. Don't make a hidden track for your sliding door. There is no way to maintain it in the future.

20. If the bathroom is small, try to move the door. Don't open the door to occupy space.

2 1, if you are not sure about carpentry, you must communicate with the foreman more and never let them make their own decisions.

22. Money is the last word.

23. If you have children at home, use less glass.

24. Be sure to let the workers have a good look at the drawings.

25. Kitchen drawers are very useful.

26. The flatness of the wooden keel of the floor is 5mm.

27, wool floor should be paved with 30 degrees or 45 degrees, leaving 2~3MM between boards, and the joints should be staggered.

28. Leave a seam of 8~ 10MM between the ground and the wall.

29, composite floor length more than 8M expansion joints should be considered.

30. Try to use MDF as a door cover as little as possible.