Dismantling method of Okuda gas stove

Okuda gas stove is a very easy-to-use kitchen appliance, but it needs to be disassembled if it breaks down or needs cleaning and maintenance in daily use. The following is the disassembly method of Okuda gas stove for your reference.

Step 1: cut off the air supply first.

Before disassembling the Okuda gas stove, the gas valve must be closed, and the connection between the regulator and the gas stove must be disconnected to ensure that the gas supply has been completely cut off to ensure safety.

Step 2: Remove the cover of the cooker.

There are many ways to cover the Okuda gas stove, the common ones are top mounting and side mounting. For the top-mounted cover plate, first open the clips on both sides, and then gently pull up the coaming. For the side-mounted cover plate, it is necessary to tilt the coaming to one side at a certain angle to uncover it. After the cover plate is removed, the bracket, burner and other parts will be seen in the cooker area.

Step 3: Dismantle the bracket and burner.

Removing the bracket and burner usually requires a screwdriver and pliers. First, remove the screws and closed metal sheets from the furnace. Then, hold the short side of the bracket by hand or pliers, and gently lift and remove the bracket. Next, hold the lower part of the burner by hand, rotate the burner clockwise and take it out.

Step 4: Clean the gas stove.

After disassembling the parts of the gas stove, you can clean it. The premise is that you need to consult the cleaning and maintenance guide in the user manual first, understand how to clean all parts, and pay attention to the installation depth. After the cleaning method of each component is clear, prepare the cleaning tools to ensure that they are thoroughly dried after cleaning.

Step 5: Reassemble

After cleaning and thoroughly air drying, reinstall the burner on the cooker and rotate it to the right. Assemble the bracket again, and then put the cover back on the cooker in the original way. Before reassembling, be sure to check whether the installation positions and directions of all components are correct, so as to ensure the normal operation of the gas stove.

The above is the disassembly method of Okuda gas stove, hoping to help everyone. At any time, safety first, we must pay attention to prevent gas leakage and other security risks.