Drawer pulls what style good-looking

Summary: In our common life furniture, many drawers and cabinet doors have handles, handles are convenient for us to quickly open and close the drawer cabinet doors and so on. Due to frequent use is easy to damage, so we need to correctly install drawer pulls, and pay attention to maintenance in the process of use. There are many drawer pull styles, including common convex drawer pulls, metal drawer pulls, and leather pulls, and invisible embedded drawer pulls, so here we come to understand more drawer pull styles, as well as drawer pulls to install the best location and installation considerations. A drawer pull what style good-looking

1, convex drawer pull

This kind of pull pull is the most common one, there is a long strip, half dumpling type, single-ended ball type.

With the cabinet color and style selection of pulls, generally not ugly, but want to be out of the ordinary, do not choose the conventional models, we need more design.

2, leather drawer pulls

Soft leather attached to the cold cabinets, soft and hard, warm and cold sense of contrast, giving people a refreshing feeling. But the life of the leather will be shorter than other materials, it is best to thicken, pull drawers and cabinet doors are not too rough.

3, metal drawer pulls

Minimal and metal is the best partner, especially in the minimalist style of the home, the lines of simple cabinets, with the simplest metal, texture has come out. Then add a little sense of design, low-key luxury with connotation is your home!

4, embedded handles

The handles are designed in the cabinet door surface, there is no raised place to put your hand in order to pull out the door. Open in the cabinet door surface of the embedded mouth is recessed, open in the cabinet door side of the embedded mouth is invisible.

5, recessed drawer pulls

Pulls designed so that you do not have to worry about accidentally bumped up, but the recessed drawer pulls are easy to accumulate dust inside, cleaning housework to be more laborious.

6, invisible drawer pulls

Flat and smooth without any defects in the appearance of the absolute cure for obsessive-compulsive disorder. There are three ways to achieve this effect, 1 is deducted from the door panel modeling, the second is to leave more than 2 centimeters of the door seam, 3 is the cabinet door to do a long point has a focus point.

7, hidden drawer pull

There is a real invisible, you can not find where the puller is hidden, because it is really no pull, using the press type. The door opens automatically when you press the door panel, and closes by pressing the panel inward.

To achieve this effect only need to install the rebounders or touch beads, these two objects belong to the category of hardware, long-term use may not be able to pop the problem, the purchase must pay attention to the quality of hardware.

Two, drawer pulls installed in the best position

1, drawer pulls installed in the position

In the door plate with a little paper tape, in accordance with the pull on the hole on the moment to draw the two marks, the normal specifications of pulls are now used in the system of 32mm, that is, the two holes distance is an integer multiple of 32, such as: 64, 96, 128, 160 and so on

In the Here to remind you: pull the factory original screw length is 2.2cm, the general standard cabinet door is 1.8cm thick, with 2.2cm screws; if it is 2.0cm board with 2.5cm screws, 2.5cm thick board with 3.0cm screws, 3.0cm thick board with 3.5cm screws. And so on, the screws than the board thickness of 3-5MM is good. If you are not clear about the thickness of the board, you can ask the carpenter, or measure the thickness of the board yourself, so as not to match the wrong screws, delay the work.

2, furniture handles installation notes

A set of furniture handles in the horizontal and vertical installation of general unity (including the shape of the single-hole handles toward), but drawer panels, upturned doors, downturned doors door handles are horizontal.

The upper cabinet door panel handles are installed below the door panel, the lower cabinet door panel handles are installed above the door panel, the high cabinet door panel handles should be installed in a convenient location for the principle of use.

Drawer panels, lower flap doors, upper flap doors, doors with door fittings door panels are generally installed in the width of the door, open door panels are generally installed on the side away from the installation of hinges.

There are two types of drawer panel handles installation height, installed in the panel height or from the panel on the board edge of the uniform height installation.

An pull hand when the pull hand against the edge of the hole from the edge of the board distance is generally 45mm.

Surface modeling of the door panel (such as solid wood door panels) should pay attention to the feasibility of the installation of the pull hand.